Windows 10: Driver Power State Failure

Little bit of backstory, so I built this pc about a couple months ago, and everything was fine. Last night before leaving the house, I updated and shut down the computer and thought nothing about it. Today, when logging onto my computer, it would stay on for about 5 mins before this screen pops up, and then it restarts. It does every about every 3-5 mins when it’s on. My VGA light on motherboard has turned on in the past but typically goes away after like 10 minutes. I’ve seen that a good solution to try is to update or go back a update on ur drivers for ur graphics card on device manager, but

:)

 

driver power state failure help!

Hi,

It is possible that the error Driver Power State Failure you received is can be caused by
the driver itself or power settings.
To address your issue, we suggest that you follow the steps shared by S M Mahmudul Hasan
on this thread on how to troubleshoot Driver Power State
Failure.

Keep us posted if you need additional help.

 

DRIVER POWER STATE FAILURE

I have tried to follow instructions to solve DRIVER POWER STATE FAILURE and to this point I find a lot of these 'experts' suggest doing things which are beyond the usual user level. This failure came on suddenly and even though I can log on the failure occurs each time. If possible PLEASE provide an easy to follow help. Someone suggested there may be a problem with the power supply. Is this possible?

Fortunately I have other computers to use.

 

DRIVER POWER STATE FAILURE

For Driver Power State Failure, please check out following (Most likely reason is faulty / corrupted driver) -

https://thewindowsplus.org/driver-power-state-f...