Windows 10: DRIVERS FOR ATAPI iHAS 124

REQUIRE A DRIVER FOR

ATAPI iHAS 124

:)

 

ide ata/atapi controllers

Hi ibme,

Thank you for writing to Microsoft Community Forums.

I understand that it can get difficult if the system are not working as expected.
However, we can go ahead and try few steps to see if we can resolve this issue.

Method 1: Check hidden devices in Device Manager.

1. Press Windows Key +x
2. Click Device Manager
3. Go to Views tab and click on Show hidden devices from the drop-down menu.
4. Then search for hidden drivers if any IDE ATA /ATAPI DRIVER
   are listed.
5. Uninstall all the hidden drivers and reboot the PC, and check if that helps.

I also suggest you to refer this article on
Your CD or DVD drive is not recognized by Windows or other programs, and check if that helps.

If you need any additional assistance, please write back with the
model number for dell computer?

I look forward to hearing from you soon.

Regards,

 

Windows 10 pro only boots in Disable Driver Signature Enforcement and error 0xc000021a otherwise

Thanks for following up. I missed the part when you mentioned that you already attempted to rebuild BCD and I apologize for that. Moving along, the next step that we can suggest is to use a different driver for the IDE ATA/ATAPI controller. Here are the
steps:

• Go to Control panel > Hardware and Sound >
  Device manager.
• Open the IDE ATA/ATAPI controllers tab.
• Select the controller 'SATA AHCI,' right click and select Properties.
• Choose the Driver tab and Driver Details and check if the driver found there is 'iastor.sys'.
• Select Update Driver Software, Browse and Let me Pick from a list of devices.
• Select 'Standard SATA AHCI Controller' from the list and install.
• Restart your PC.

This process was found to be a fix to the majority of reported WATCHDOG_VIOLATION errors in windows 10. If the issue still persist, we suggest updating all other drivers, especially your graphics card driver
manually.

Please do let us know the outcome of this troubleshooting step.

 

BSOD 124 on 3DMark only.

if thats a C3 stepping try 1.5 vcore.
if its a C2 stepping try 1.6 max.
keep temps under 55c.

if vcore moves at all when monitoring volts at higher volts, it wont do it period.
cpu-nb volt above 1.375 is only needed when running high north bridge speed 2600 +,
high ram fsb, or 4 sticks.

generally a 124 is vcore.
50, a, 34, etc are memory.

you need to post all your settings, and volts, some cpu-z, gpu-z screenies too.