Windows 10: Dual boot Windows 10 and Windows 11

I have a custom rig with an MSI x570 motherboard, a Gigabyte brand 1terabyte m2 drive in the m2 2_1 slot and also the same drive in the m2 2_2 slot. I have Windows 10 loaded on the m2 2_1 drive works fine and have been trying to load Windows 11 on the m2 2_2 drive but it will not load. It gives me an error that the partition can't be found. I have deleted all of the partitions of the hard drive in the m2 2_2 slot and created a "New" partition but once again, when I select it to load Windows 11, I get the same error again, the partition can't be found. How do I fix this?

:)

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

Dual Boot Windows question.

here is a guide that should do the trick: https://www.howtogeek.com/197647/how-to-dual-boot-windows-10-with-windows-7-or-8/

Just remember if u want UEFI on Windows 10 u most have UEFI on your Windows 7 too if not u need to go change it in the bios everytime u want to go back to Windows 7.

 

Dual Booting with Windows 8.1


The procedure below will allow you to boot Windows separately or in dual boot configuration.
Here's what I recommend to do:

1. Disconnect the drive containing Windows 8.1
2. Install Windows 10 with one drive connected.
3. After step 2, reconnect the drive containing Windows 8.1
4. Boot up Windows 8.1. Open disk management and take a note of the drive letter of Windows 10 OS.
   NOTE: if you boot up Windows 10, then take a note of Windows 8.1 drive letter
5. Open Admin command prompt and type: bcdboot X:\windows where X: is the drive letter of Windows 10 (Windows 8.1 if you boot from Windows 10 in step 4)
6. Reboot the PC. You should have a dual boot screen.

NOTE: To break off the dual boot setting, Win+R->msconfig->boot and delete the none default entry on the list.