Windows 10: error 43 win 10

Como solucionar error 43 win 10 no reconoce host usb

:)

 

USB SuperSpeed error code 43

Win 10 ver 1709.

Device Manager always reports the SuperSpeed has a problem.

I have tried uninstalling, updating drivers and a Win 10 online reinstall (repair upgrade?). No change. I installed Win 7 to a spare drive and it finds no USB problems. Also, in Dev Mgr, Win 7 does list a SuperSpeed.

I attached snips of USB Tree and Dev Mgr under Win 10 & Win 7.

I want to make the SuperSpeed error go away.

Thanks, everyone,
Terry

 

Windows 10 / Nvidia 1030 - Code 43

After a Windows (Win 10 Home) update yesterday afternoon my son's PC reported the problem shown in the image below.




The result of this means he cannot play the very popular "Fortnite" game which reports this error.





Assuming the problem is caused by either the Windows Update or a driver update have done the following;

• Re-installed the latest Nvidia Driver. This didn't fix the problem.
• Installed the previous set of Nvida Drivers. This didn't fix the problem.
• Via the Control Panel / Device Manager I disabled and enabled the device. This didn't fix the problem.
• Via the Control Panel / Device Manager I used the "update driver" feature. This didn't fix the problem.
• I did a system restore to the day before. This did not complete with Windows reporting the Anti Virus software may have prevented the process. Default Windows Defender is the AV.
• I disabled the AV and tried system restore again. This didn't fix the problem.

In all other areas the system is functioning fine although my son said he had low FPS on Rainbow Six Siege which he tried to play when Fortnite wouldn't launch.

The PC is just over a week old so I am doubtful of any hardware issues with no other symptoms or errors showing.

So...any ideas or suggestions for next steps please?

 

Error Message when updating from Win-7 to Won-10

Bree
I followed your suggestions (2nd Aug 19) for installing Win-10. Made the bootable flash drive successfully through the media creation tool. But when I attempted to upgrade and activate to Win-10 (64 bit) from within Win-7 (Pro-32 bit), I got the following error message:

Error # OxC1900101-Ox20017. " The installation failed in the SAFE_OS phase with an error during BOOT operation"

I read the diagnostics under this error number and carried out the proposed fixes, i.e. update Win-7, uninstall Malwarebyte antivirus, disconnect all external hardware, e.g. printer, scanner, external hard drives. I then tried to repeat the steps to do the upgrade through the Win-10 bootable flash drive as before. Got the same error message.
Appreciate any further comments and suggestions as to (a) what does a failure in the SAFE_OS during boot operation mean, (b) what can I do to solve it. Is this anything to do with the hardware in my computer? I listed these in my first posting above.
Thanks for any help