Windows 10: Error: No boot device found after performing reset

Otóż tak, w ostatnim czasie resetowałem całkowicie system podczas resetu wystąpił błąd więc skierowałem się do Microsoft Support powiedziano mi że trzeba ponownie zgrać system zrobiłem to i wszystko się udało, lecz gdy teraz próbuje odpalić system pojawia się błąd NO REBOOT DIVICE i nie i nie wiem co dalej robić

Pomocy!




Well, yes, I recently completely reset the system during the reset, an error occurred, so I turned to Microsoft Support, I was told that I need to rip the system again, I did it and everything went well, but when I try to start the system now there is a NO REBOOT DIVICE error and I don't know what to do . Help!




***Modified title from: System Reset No Reboot Device***

:)

 

"Inaccessible Boot Device" error

Hi Bill,

The Inaccessible Boot Device error is usually occurring if a device driver that the computer boot controller needs is corrupted. For us to provide an effective solution, we would need you to answer the following questions:

• Which build and edition of Windows 10 is currently installed on your computer?
• Can you boot the PC to the desktop?
• What update are you trying to uninstall?
• What error message are you getting when you are trying to uninstall the update?

Since you already performed the troubleshooting steps that you mentioned in your post, we suggest performing an in-place upgrade. This
article published by
PaulSey provides further information on how to perform an in-place upgrade with Windows 10. In-place upgrade can repair Windows system files and can give you an option to keep your program and personal files. Check if the same issue persists
after performing an in-place upgrade.

We are looking forward to your response.

 

Boot Device not found

Hi Alan,

Corrupted system files or it boot to a different hard drive that it why you received the message Boot Device no found. To better assist you, we'd like to gather more information:

• Have you made any changes prior to this issue?
• Which build and version of Windows 10 are you using?

Meanwhile, we suggest that you follow these steps on how to perform automatic repair:

• Force turn off your computer/device 3 times until you reach the Automatic Repair environment.
• On the list of options under Advance options, choose Start-up Repair and perform the instructions.

Let us know if you need further assistance.

 

Unable to boot the device with error: 0xc0000428 on Windows 10

Hi Vuk,

Thank you for posting in Microsoft Community and being part of Windows 10.

I understand the inconvenience you are facing in booting the device with 0xc0000428 error. We will help you with this issue.

Do let us know the following to assist you better with this issue:

• What is the make and model of your device?
• What is the complete error message along with the error code of this issue?
• From when are you facing this issue?
• Have you make any hardware/ software changes to your device prior to this issue?

I would like to inform that when you attempt to start a Windows 10 system, the system fails to start normally and you receive an error:
0xc0000428 for the signed driver dlkmdldr.sys. Do confirm us if you are facing the same issue.

Try the below and check if it helps.

Step 1: I suggest you to remove all the external devices except mouse and keyboard, hard reboot the device and check if the issue persists.

Step 2: I suggest you to boot the device by choosing the "Disable Driver Signature Enforcement" mode from the advanced boot menu, you would be able to boot the system to the desktop.

• Try to boot the device to Windows Recovery Environment
• Click on Advanced options, Startup Settings
  and Restart.
• Once the computer restarts, press F7 key to start he device on
  Disable Driver Signature Enforcement mode.
• Check if the computer boot successfully.

Step 3: I suggest you to install the pending updates on your device after restarting the computer.

Steps:

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Try the above an update us the status of this issue to assist you further accordingly.