Windows 10: Errors after changing hardware

I changed my cpu, ram, and motherboard back at christmas. When I changed over I hadn't properly prepared windows for the change and had to reactivate windows. The problem was that I had lost the key and had to contact support and get a new one. This issue has been worked out but for the last few months I have been getting numerous different error codes when booting my computer. Error codes like 0xc0000221 and 0xc0000001 I can't remember the others. About a month ago I used the windows installation media to make a flash drive to reinstall windows. After booting I was met with a blue screen and I could only continue to the installation window after spam clicking enter. I reinstalled windows but it has not fixed the problem. I ran memtest86 to see if there was a problem with my ram and it didn't detect any problems. This problem will go away for a few days even a week sometimes and then come back leading me to thinking that I fixed it. I have no clue what to do and could use any help.

:)

 

Unable to activate Windows after hardware change

Hi,

Thank you for writing to Microsoft Community Forums.

Usually the error code 0xC004F213 comes when there is a hardware change done on the computer (like Motherboard or Hard drive). The Windows license is associated with the device hardware. If there is any significant hardware changes, such as replacing
motherboard or hard drive, Windows won’t be able to recognize the license.

I suggest you to try the troubleshooting steps from the article
Reactivating Windows 10 after a hardware change and see if Windows gets activated.

If you are using an OEM computer that came with Windows 7, and the motherboard has not been changed, then you can follow the steps to retrieve the product key that came with your OEM computer. To retrieve the product key follow the steps mentioned
below:

1. Type Command prompt in the search bar, that is on the taskbar.
   
2. Right click on Command prompt icon and select Run as administrator.
   
3. Type the command and press on Enter: wmic path SoftwareLicensingService get OA3xOriginalProductKey
   
4. You will find the product key.
   

Hope it helps.

Please reply with the status of the issue, we will be glad to help you further.

Nikhar Khare

Microsoft Community - Moderator

 

windows 10 reactivation after hardware change

I just changed motherboards, and When I follow the the steps listed in the "reactivate windows 10 after hardware change" support page, it gives me the message "unable to activate windows" message after I sign in and identify my device,
with no error code, just a subheader that says "can't activate windows 10 on this device, try again later."

 

Activation problems after hardware changes and reinstallations.

Hi Meli,

Thank you for posting the query on Microsoft Community.

I do appreciate your efforts and time.

Was Windows 10 activated before re-installing it?

Along with the suggestions provided by Greg, you can also refer the steps below.



The only hardware changes that can negatively impact activation status once you upgrade to free version are the changes to the:

• CPU
• TPM
• Motherboard replacement

The following changes are examples of hardware changes that will NOT impact the activation status:

• HDD/SSD
• Video card
• Adding extra memory

If you replace the CPU, TPM, or Motherboard you may have to re-activate but this will not require a purchase of Windows 10.

Why can't I activate Windows 10?:

http://windows.microsoft.com/en-us/windows-10/why-activate-windows-10

Get help with Windows 10 activation errors:

http://windows.microsoft.com/en-us/windows-10/activation-errors-windows-10

Can I clean re-install Windows 10 after upgrading?

Can I clean re-install Windows 10 after upgrading?

Hope this helps in resolving the issue. If the issue persists, do get back to us. We will be happy to assist you.