Windows 10: Fail to boot into windows10 creation usb

Hi

I'm trying to fresh install windows 10 on a new samsung ssd for an old pc with Gigabyte MA790GPT-UD3H motherboard. I created the usb installation media and verified that it worked on another newer Dell pc. But when used on the target PC above, after choosing boot from USB-HDD, I got the screen below after post. I'm wondering if it is because my motherboard does not support UEFI partition? Tried to create .iso and boot from CD too. I could see the windows logo flash for a second and then I was stuck with a black screen when booting from windows installation CD. The PC boots into windows 10 fine with the current HDD the one I'm planning to replace by the ssd.


Any suggestion on what was happening or how I could fresh install windows10 on this PC? Thanks.



:)

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks

 

windows 10 fails to boot

Hi Dennislee,

Thank you for using Windows 10.

I would suggest you to download the Windows 10 ISO and create a Media Creation tool and then perform StartUp Repair.

Refer to the following link:

Download Windows 10

(Refer to the section "Installing Windows 10 using the media creation tool " in the above article for creating
the tool).

Once you have the installation media, follow the steps:

• Start your computer from the installation media. Insert the disk or USB stick and restart your computer. If you see a message asking you to “Press any key to boot from DVD,” do so. If you don’t see the message, you might need to
  change the boot order in your computer's BIOS settings so that it first starts from the disk or USB. When you see the 'Install Windows' page, tap or click 'Repair your computer' link to start the Windows Recovery Environment.
• In the Windows Recovery Environment, on the Choose an option screen, click 'Troubleshoot'.
• Click, Advanced Options and then click on 'StartUp Repair'.
• After this complete the repair and see if you are able to boot in to your computer.

Hope the information helps. Kindly get back to us with the updated status and we'll be happy to assist.