Windows 10: Fans are speeding up like crazy help

The Grid software apparently is not for the 650. It works on the 900 models. There is apparently no software for your model. I must have given you bad info. Try reducing the fan speed in BIOS. Also, what color is the light on the cooler?

 

Yes, I have saved my settings in BIOS when exit out of it. Did not help what so ever. Still the same. Thats when I went back to BIOS and put it back to the default that it came with.
I saw the comments and I guess its just a really bad cooler I have. Thanks I think I will mark this as Solved due to that it feels like there aint much to do about this....too bad..

 

I'm not familiar with Gigabyte motherboards, but most have the capability of setting a fan profile. You can usually set a minimum fan speed and a max fan speed, then assign CPU temps to those. You may look for that and see if it works. I use a fan controller and control all of them manually. Which ever way you do it, you need to monitor your CPU temps to know when you have the right balance. As bad as the loud fans are, they are better than an overheating CPU.

You may also call whoever built the computer and talk to them. But, you do need a third party CPU cooler and not the stock one.

 

What I read from Antec site , there's only software for Model 950. For 650, it has an Integrated PWM fan automatically adjust fan speed based on temperature.

Another case is the noise might come from the pump as shown in this video.
Antec kühler H2O noise FIX - YouTube

FYI, I built a PC for a friend of mine and used a Corsair H50. The unit produces almost no noise with the case closed.
corsair h50 - Newegg.ca

If your PC is still under warranty then I would ask to exchange the unit or replace with a Corsair H50 which has 5 star rating at newegg.

 

Good answer @topgundcp. That's what it seems. I had the 950 and it had the software. (it wasn't real useful), but from what I see, the 650 doesn't come with any. I think the H50 is a good suggestion for a replacement.

 

The dude who built my machine does not offer that one so I dont think he will replace any parts.

 

hi I was just browsing the forum and came across this thread I have the same antec cooler on my new rig and had this problem but managed to sort it out in the bios on my MSI motherboard by using the fan controls what motherboard are you using ? also I use this software for system analysis very comprehensive you can see fan speed etc temps etc and information of sensors HWiNFO for 32 bit and 64 bit HWiNFO - Hardware Information, Analysis and Monitoring Tools

 

Hello I have all my info under "My system Specs" Gigabyte GA-Z170-HD3P - DDR4

I downloaded the 64-bits version of that app, but I cant say I understand what to do with it?

 

in your motherboard manual I found this info

CPU Fan Speed Control (CPU_FAN Connector) Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Allows the fan to run at different speeds according to the CPU temperature. You Normal can adjust the fan speed with System Information Viewer based on your system requirements.

(Default) Allows the fan to run at slow speeds.

Silent Allows you to control the fan speed under the Fan Speed Percentage item. 

Manual Full Speed Allows the fan to run at full speeds

 

click here for your motherboard manual go to page 25/26 tells you about the fans it will open in a browser http://download.gigabyte.eu/FileList...170-hd3p_e.pdf

 

CPU Fan Speed Control (CPU_FAN Connector) Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the CPU temperature.
You can adjust the fan speed with System Information Viewer based on your system requirements.
(Default) Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
& Fan Speed Percentage Allows you to control the fan speed. This item is configurable only when CPU Fan Speed Control is set to Manual. Options are: 0.75 PWM value /oC ~ 2.50 PWM value /oC.

 

Thank you for all information I will try to look into all of this later on tomorrow. Very nice of you all to try to help me here guys! *Biggrin