Windows 10: Format Bug in Windows11

My operating system is Windows 11 on my computer besides an internal ssd hard drives I also added additional extended hard drives connected to the usb ports. Right clicking the mouse on File Explore and "This PC" shows the letter and drives that are connected to the computer. One day I wanted to use the format command, I selected the drive that I wanted to format then right click the mouse to select the format command, there were a few screens prompts letting me know that any previous data stored on the selected hard drive will be erase, I proceed to format the selected drive that I wanted.. a

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

如何升级windows11

我需要升级windows11的教程，请使用中文答复我，谢谢

 

Changing Time Format

Hi Mary,

There's a possibility that the set up time format in your computer Basic Input/Output System (BIOS) is military time. To have this checked, you can try to reset the time of your computer through Control Panel. See the steps below on how to do
so:

• Open Control Panel > Clock, Language, and Region >
  Change date, time, or number formats. This would open the
  Region window.
• From there, click on Additional settings at the bottom part. It will open the Customize Format.
• Click Reset; then, OK.

The steps should work; however, if not, we suggest that you contact manufacturer and have the BIOS time checked.

Let us know what happens after doing the suggestions .