Windows 10: Frequent BSOD (Diag ZIP Included)

I have been getting frequent BSOD while lightly using the PC I am also getting "windows could not load" when booting, turn it off and back on and it boots like normal.

Thanks for any help.

:)

 

Getting continuous BSOD's on startup

Original Title: Windows 10 BSOD

I get continuous BSOD's on startup and on occasion the BSOD will happen after boot sometime. I have included a link to a zip file containing a minidump, memorydump and system info. Please help!

 

BSOD with Bluetooth Headset

Memtest works fine (I have run it recently). Driver verifier BSODs on boot. I have included the minidump in the zip file linked above.

 

All the dumps I looked at showed memory_corruption or memory_management problems.

The first thing you need to do then is test your PC memory:
===================================================
RAM:

Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums



Information




MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

• RAM will accept and keep random patterns of data sent to it
• There are no errors when different parts of memory try to interact
• There are no conflicts between memory addresses

Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.



Warning
MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.

If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.



Note
MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.

Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.