Windows 10: Fresh install Windows 10 (1903) "Back up using File History" Toggleswitch now fails with...

Discus and support Fresh install Windows 10 (1903) "Back up using File History" Toggleswitch now fails with... in Windows 10 Installation and Upgrade to solve the problem; Hello, i was running 1803 before now, when windows update decided for some unsolvable reason it didn't wish to update me to 1903, so i reinstalled via... Discussion in 'Windows 10 Installation and Upgrade' started by TauCubed, Oct 15, 2019.

  1. TauCubed Win User

    Fresh install Windows 10 (1903) "Back up using File History" Toggleswitch now fails with...


    Hello, i was running 1803 before now, when windows update decided for some unsolvable reason it didn't wish to update me to 1903, so i reinstalled via a USB (Yes i checked the USB for bad-blocks and ran a checksum app after it was written, it came back verified.

    After installing windows and copying my folders/re-installing some of my apps, i decided to update my File History drive (it worked flawlessly on 1803), I added my drive and then went to activate it, unfortunately it failed with that error, now for some reason i cannot even remove my filehistory drive let alone back up to it as when i go to "switch it on" it fails with that error, otherwise i would have tried a different drive, it fails regardless with the same error whether the drive is plugged in or not. (https://i.imgur.com/RaflxBQ.png)

    And when i try to use the windows 7 file history, it says a dialog appears almost instantly and says "Access is denied" with no further clarification or explanation. (https://i.imgur.com/A848CMU.png)

    This is a big problem fore me so any help would be appreciated, the only settings i have changed/installed (that i remember) are:

    Changed:

    • The computers name
    • (path) Environment variables for java
    • (path) Environment variables for FFmpeg


    Installed:

    • Notepad++
    • Eclipse IDE
    • Steam
    • Firefox
    • FFmpeg
    • Java JDK
    • Java JRE
    • Nvidia stuff
    • OpenShell
    • OpenExplorer
    • K-Lite Codec pack (mega)
    • WinRar
    • GlassWire

    I installed bitdefender, but after the fact, and i did (for some reason) try disabling it and retrying to no effect.
    Thanks in advance.

    :)
     
    TauCubed, Oct 15, 2019
    #1
  2. Delta6326 Win User
    Delta6326, Oct 15, 2019
    #2
  3. jds21 Win User
    Windows Updates failed to instal

    I just did step one and they have just all installed.... thank you so much.... it was quite frustrating having that update window pop up every 5 minutes and failing to instal every time

    Thanks mate
     
    jds21, Oct 15, 2019
    #3
  4. AsRock Win User

    Fresh install Windows 10 (1903) "Back up using File History" Toggleswitch now fails with...

    Windows Updates failed to instal

    I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

    Step 1 Register DLL files.

    =================

    By trying this step, we can check if the update engines are working properly.



    1. Close all instances of Internet Explorer.

    2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



    Note: There is a space between regsvr32 and atl.dll



    3. Similarly, one by one, register the files listed below:



    Regsvr32 msxml3.dll

    Regsvr32 wuapi.dll

    Regsvr32 wuaueng.dll

    Regsvr32 wuaueng1.dll

    Regsvr32 wups2.dll

    Regsvr32 wucltui.dll

    Regsvr32 wups.dll

    Regsvr32 wuweb.dll

    Regsvr32 qmgr.dll

    Regsvr32 qmgrprxy.dll

    Regsvr32 jscript.dll



    Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



    If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



    Step 2 Verify the relevant Windows Update services.

    =========================================

    1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

    2. Double click the service "Automatic Updates".

    3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

    4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

    5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

    6. Then please click the button "Start" under "Service Status" to start the service.

    7. Please repeat the above steps with the other services:



    Background Intelligent Transfer Service

    Event Log

    Remote Procedure Call (RPC)



    Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



    If it still does not help, let's proceed to step 3.



    Step 3 Reload the Update temporary folders.

    ===================================

    One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



    1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net stop WuAuServ



    2. Click Start, Run, type: %windir% and press Enter.

    3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

    4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net start WuAuServ



    Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.
     
    AsRock, Oct 15, 2019
    #4
Thema:

Fresh install Windows 10 (1903) "Back up using File History" Toggleswitch now fails with...

Loading...
  1. Fresh install Windows 10 (1903) "Back up using File History" Toggleswitch now fails with... - Similar Threads - Fresh install 1903

  2. Windows 10 File History Back-up Fails

    in Windows 10 Gaming
    Windows 10 File History Back-up Fails: Two days ago, the File History Backup stopped working and cannot be re-started. Keep getting "Unusual condition was encountered during finalization of a backup cycle for configuration" - Event ID 204 Source: FileHistory-Core in Event Viewer. What's wrong?...
  3. Windows 10 File History Back-up Fails

    in Windows 10 Software and Apps
    Windows 10 File History Back-up Fails: Two days ago, the File History Backup stopped working and cannot be re-started. Keep getting "Unusual condition was encountered during finalization of a backup cycle for configuration" - Event ID 204 Source: FileHistory-Core in Event Viewer. What's wrong?...
  4. Windows 10 File History Back-up Fails

    in Windows 10 BSOD Crashes and Debugging
    Windows 10 File History Back-up Fails: Two days ago, the File History Backup stopped working and cannot be re-started. Keep getting "Unusual condition was encountered during finalization of a backup cycle for configuration" - Event ID 204 Source: FileHistory-Core in Event Viewer. What's wrong?...
  5. Back up using File History

    in AntiVirus, Firewalls and System Security
    Back up using File History: Hi thereI have a portable Samsung external hard drive attached to my computer which I use for backup purposes.However File History does not recognise it as a usable drive. When I click on 'add a drive' in Back Up it says 'no usable drives found'. How can I make it recognise...
  6. Back up using File History

    in Windows 10 Installation and Upgrade
    Back up using File History: Hi, I am trying to back up using file history but when I try to add a drive it says "No usable drives found". My WD Elements drive works fine and I can save my work there but when I try to Add a drive for back up using file history it says no usable drives found. Please help....
  7. Backing up using File History

    in Windows 10 Installation and Upgrade
    Backing up using File History: If I back up using File History to an external storage, will it erase the existing data on the external storage? https://answers.microsoft.com/en-us/windows/forum/all/backing-up-using-file-history/4126a239-ea5d-4b3d-84be-7a8dca371d5b
  8. Windows 10 file history not backing up.

    in Windows 10 Installation and Upgrade
    Windows 10 file history not backing up.: Ever since 7/29 my backup hasnt been working, i have tried 4 times now already but the size and date for the most recent backup hasnt changed it says, I dont know if thats a glitch or not but I might be getting a new PC soon and I will try and change the hard drives out and...
  9. Back Up Using File History...Windows 10 Version 1903

    in Windows 10 Backup and Restore
    Back Up Using File History...Windows 10 Version 1903: Got all sorts of goofy....can't help but think it was due to operator being a buckethead. All of my images that I already edited and exported out of Lightroom had additional junk added to the file name. Everything in my document folder did as well. Some of my downloaded...
  10. File history/ Back-up

    in Windows 10 Installation and Upgrade
    File history/ Back-up: I accidentally deleted my recovery partition and now I get an error saying check back-up settings. How can I re-install? https://answers.microsoft.com/en-us/windows/forum/all/file-history-back-up/83dfd074-f1b6-4cfc-8d02-4e0945a155de

Users found this page by searching for:

  1. backing up windows10 home 1903