Windows 10: Getting BSOD 0x0000003b 0x00000000c000001d, 0xfffff80607d2641f, 0xffffe6011bbd7900,...

I upgraded the parts mentioned above recently 12600kf and a B760-Plus D4 specifically, everything else remained the same as before. Windows 11 is a clean install on the same M.2 SSD as before after wiping it clean during the installation process via boot drive USB.I have 3 error logs from crashes that happened over the course of today, the first was a hard crash where my screen simply froze before my PC automatically rebooted, the other 2 were BSODs. Software wise I have only HWInfo64 as a software that I didn't previously use installed, as well as all of the relevant drivers for my Mother

:)

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile

 

BSOD: 0x0000003b

I was just playing a game of Modern Warfare 2 (2022) when my computer crashed and bsod'

i went into event viewer and saw that the computer rebooted due to bugcheck code: 0x0000003b

a dmp file was saved

if anyone can help, that would be greatly appreciated. thanks.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.