Windows 10: Getting internet on my 2nd network

Hi,


I'm connected to the internet via LAN connection on my Windows 10 surface.


192.168.0.0


I have a second network made up of Raspberry Pies.


192.168.123.0


I have both networks plugged into my surface docking station (with the help of a USB to Ethernet adaptor)


I can ping from my Pie to my Surface and vice versa - but I can not get web access from my Pie.


LAN 1 Surface dynamic IP: 192.168.0.126 <-- has internet access

LAN 2 Surface static IP: 192.168.123.13

Raspberry Pie static IP: 192.168.123.55


Here is the routing table from my Surface:


IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.126 25
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
192.168.0.0 255.255.255.0 On-link 192.168.0.126 281
192.168.0.126 255.255.255.255 On-link 192.168.0.126 281
192.168.0.255 255.255.255.255 On-link 192.168.0.126 281
192.168.123.0 255.255.255.0 On-link 192.168.123.13 291 <--- sees the other network
192.168.123.13 255.255.255.255 On-link 192.168.123.13 291
192.168.123.255 255.255.255.255 On-link 192.168.123.13 291
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 192.168.0.126 281
224.0.0.0 240.0.0.0 On-link 192.168.123.13 291
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 192.168.0.126 281
255.255.255.255 255.255.255.255 On-link 192.168.123.13 291
===========================================================================
Persistent Routes:
None


Why do I not have internet access on my Pies?


The Pies are setup with server, DNS, and DNS Search set to 192.168.123.13 (my Windows 10 Surface)


Do I need to configure a proxy server on my Windows 10 surface?


The Pies need to be kept on their own network to preserve IPs for the office network, but I still want them to be able to access the internet.

:)

 

Set Broadband Internet Connection Network Configuration

Hi,

Upon analyzing the details you have provided, kindly run the
Network and Internet Troubleshooter
and check if there's any changes. To run the
troubleshooter,
follow these steps:

• 
  On the search bar, type
  Troubleshooting.
  
• 
  Choose
  Network and Internet.
  
• 
  Run the following
  Troubleshooter:
  
  • 
    Internet Connections.
    
  • 
    Network Adapter.
    
  • 
    Incoming Connections.
    

If the issue persists, we suggest that you try to
renew
your
IP address. To do this, follow these steps:

• 
  Open
  Command Prompt
  as
  Administrator.
  
• 
  Type the following command:
  
  • 
    Ipconfig/release
    and hit
    Enter.
    
  • 
    Ipconfig/renew
    and hit
    Enter.
    
  • 
    Exit.
    

Let us know how it goes.

Regards.

 

Did our Epson printer get hacked?

Another question, is this on a home network or a work network? The steps @eidairaman1 listed are always a good first step. If this is on a work network you manage, I'd be much more concerned than the home one. It is possible someone is screwing with you, but malware could also be the culprit.

 

Kick or Ban who is connected with my internet ?


You would have to do that on your Router's setup webpage. 1st step is to turn on WiFi encryption and password. 2nd step, if you feel you need to, is set up an access list of the physical MAC addresses for the network adapters of the computers you want to allow to connect. Any other network adapter not on that MAC filter list won't be able to connect. (but MAC addresses can be easily spoofed, if the third person knows which MAC addresses are allowed).