Windows 10: Had Driver Power State Failure and now can't power on

I turned on my laptop and it was fine then it started to sound like a jet engine which never happens and froze. Then it gave me that error code (i think cause it happened so fast) and now when i hold the power button it won't turn on. (this is from another computer)

Is there anything i can do or am i fucked?

submitted by /u/Green_Dayzed
[link] [comments]

:)

 

driver power state failure help!

Hi,

It is possible that the error Driver Power State Failure you received is can be caused by
the driver itself or power settings.
To address your issue, we suggest that you follow the steps shared by S M Mahmudul Hasan
on this thread on how to troubleshoot Driver Power State
Failure.

Keep us posted if you need additional help.

 

DRIVER POWER STATE FAILURE

For Driver Power State Failure, please check out following (Most likely reason is faulty / corrupted driver) -

https://thewindowsplus.org/driver-power-state-f...

 

Power driver state failure

Hello, thanks to contact the Microsoft Community. My name is Israel Torres, I am an Independent Advisor.

Driver Power State Failure errors are usually caused by a computer or device driver going into sleep mode while you’re still using the device. Windows would send a wake signal to the device once it is needed and if the device doesn’t respond in time or at all,
Windows flags a Driver Power State Failure error. The error can be caused either by the driver itself or power settings.

Fix Windows 10 Driver Power State Failure error

Two popular causes of this error were graphics drivers and Wi-Fi card drivers. It makes sense to update both while you’re here.

1. Navigate to Control Panel, Hardware and Sound and Device Manager.

2. Select your Network adapter and/or Display adapter.

3. Right click, select ‘Update Driver Software and Search automatically…’.

4. Reboot your computer and retest.

If a new driver doesn’t work, turn off power saving.

1. Navigate to Control Panel, Hardware and Sound and Power Options.

2. Select ‘Change power settings’ next to the active power plan.

3. Select ‘Change advanced power settings’ text link.

4. Select ‘Change settings that are currently unavailable’.

5. Find Graphics Settings or PCI Express and Link State Power Management and set to Maximum performance, depending on what computer you have.

6. Find Wireless Adapter Settings and set to Maximum performance.

7. Reboot your computer and retest.

If this troubleshooting doesn't work, please follow the steps in the next link:

https://windowsreport.com/driver-power-state-fa...

____________________________________________________________

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.