Windows 10: Having issues trying to reset my PC and enter Advance Boot

I have had no luck attempting this, Whenever I attempt a reset, my computer monitors show no signal and shut off. Same thing whenever I go to advance reboot. It would begin the restart process, shutting down the PC and then would not continue to boot up but the computer itself remains on.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Edge Search Does Not Permit Change of Region


I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
I would suggest you to try the below steps and check if it helps.
Step 1:
Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
2. Select Settings and click on Choose what to clear.
3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

Step 2:
I suggest you to create a new user account and check if the issue occurs.

1. Go to Settings.
2. Choose Accounts and then select Family and other users.
3. Select add someone else on this PC.
4. Enter a user name and hit next.
5. Click on Finish.
6. Sign out from the current Account and Log into the new account.

Step 3:
It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.

 

Advanced Troubleshooting not helping with booting up Windows 10.

Hi,

The issue that you're having usually happens when a specific process of the system got interrupted. This interruption can lead to system/hardware corruption. Since you were able to access that Advance troubleshooting (Window Recovery), we would like to know
if you have tried choosing the option Safe mode with Networking. If not, we suggest booting from it using the steps below:

• Go to Advance Troubleshooting.
• Under Advance options, choose Startup Settings.
• Choose Enable Safe mode with Networking or press F5.
  

After successfully booting the computer to it, we suggest running the System File Checker. Kindly follow the steps on this article to perform it:
Using System File Checker in Windows 10. Once done, type chkdsk c: /f
on the Command Prompt then click Enter. Wait for the process to finish, then
Restart your computer.

Update us with the outcome so we can provide further assistance.