Windows 10: Having issues using my subwoofer

Hi,I have a Roland Rubix44, which is a 4 channel device, and I wish to connect a pair of active speakers to one pair of channels, and an active sub to the other pair of channels. The problem is that I can't use the subwoofer in a lot of applications as I can only select stereo sound my active full range speakers or quadraphonic which isn't used by eg. YouTube, some games, etc. What I need is to be able to set up the second pair of channels as a kind of X.1 rather than quadraphonic so that I can use the subwoofer with all applications rather than the few I have that allow for proper rerouting

:)

 

Asus subwoofer not working on windows 10

I am having the same problem and i followed all of the suggested steps. I uninstalled the drivers and reinstalled them, i removed the device and restarted the pc, I installed the manufacturers drivers, i used the trouble shooter..., I searched endless
forums on the topic and tried every suggestion i saw. I still hear nothing through my external subwoofer. What now?

 

Speaker works when plugged into computer but not subwoofer

Hi,

To further isolate your concern, we'd just like to clarify the following information:

• Have you tried using the Subwoofer with different speakers?
• Have you tried plugging the speakers and the Subwoofer on different laptop or PC?

Looking forward for any information that you may provide.

 

Asus subwoofer not working on windows 10

Hi Marcus,

There might be a chance that if default audio device is not selected as external subwoofer that's the reason of no sound from external subwoofer. So, I would suggest you to check the default audio device and see if it not selected as default then try to
set it as default. For performing these task you may refer to the steps provided below.

• Windows key + X, click Control Panel, click
  Hardware and Sound, and then click Sound.
• Playback tab. Make sure the correct default audio device is selected. (For most users, the default audio device is
  Speakers.)
• Playback tab, select the correct device, click Properties, click the
  Advanced tab, and make sure that Default Format is set to the value that you expect. When finished, click OK.
• Playback tab, select the playback device, click Configure, and then make sure the configurations are set correctly.

If the sound settings are set correctly, and your speakers are already set as the default device, go to "Verify that an audio driver is installed" now.

• Set Default.
• OK to save your settings.

Do keep us updated.

Regards,