Windows 10: Headphone audio cutting off

I have a VZ-B802 VIZZ Headphone, everytime I touch or nudge the cord the audio cuts off, I've searched the internet and some says that it might be because the aux cord board is loose, I don't quite understand what to do.[COLOR=rgba215, 57, 0, 1] I already tried to troubleshoot the audio, change the headphones to be default audio for communications, I tried updating the sound card[/COLOR] and it worked for a while until the next day I went in the zoom, did my mid term exam and continues to listen songs, [COLOR=rgba133, 98, 0, 1]whenever I accidentally nudged the headphone cord, the audio either got lower or cut off[/COLOR]. Please beware I am not an electronics expert, I am just a middle schooler that wants her headphones to be fixed. So there might be some things I missed while I was troubleshooting maybe, or when I was updating the sound card, etc. It would really help if anyone could share some advice as I am not too knowledgeable in this subject. Thank you

:)

 

[WTB][EU]   Beginner audiophile headphones

i would also recommend looking at the Audio Technica m50s if this is your first step into audiophile headphones.

most of the cans you listed will also need an amp to push them.

 

Move audio to one side for speakers but not headphones

Hello J1mmyth3F1sh,

Thank you for writing to Microsoft Community Forums.

• Is your headphones getting detected in the Playback settings?
  
• Are you trying to play the audio on both Speakers and Headphones at the same time?
  

Ideally, if you have configured Sound settings to play on your left speakers, the same goes with the headphones. The sound starts playing only on the left side of your headphones according to the settings changed.

Meanwhile, we can try configuring the headphones and change the balance level in the sound settings and see if it works. Kindly check with the steps listed below and see if it helps.

Method : Run audio test for your headphones.

• Open Control Panel from the Start menu and click on
  Sound.
  
• In the Sound window, click on your
  Headphones and select Configure option at the bottom left.
  
• By running the test, check if both sides of your headphones are working fine.
  

If that doesn’t help, I would suggest you to check with the audio balance by following the steps listed below:

• Open Sound settings from
  Control Panel, and right click on the Headphones to open its
  Properties.
  
• Click on Levels tab and select
  Balance button. In the Balance window, you can use the slider to balance both left and right headphones equally.
  

However, I commend and appreciate you for recognizing this behavior. This is a valuable suggestion as there may be other users with a similar requirement. Hence, I suggest you to leave a
Feedback for this product so
that our developer team can look into this and check if it can be implemented in the future updates.

Regards,

Mala S

Microsoft Community - Moderator

 

Headphones not working and Realtek HD Audio Manager

Hello,

Thank you for updating us on the above issue.

Please reply:

• Did you check if your headphones work on other device?
• Did you check if your headphone drivers are detected under Device manager?

I suggest you to check if similar issue persists on connecting the same headphones to another computer. If the issue does not persists, I suggest you to check if the headphone drivers are detected under Device manager by following the steps below:

• Press Windows logo + X keys on the keyboard select
  Device Manager from the options.
• Expand Audio inputs and outputs option and check if the headphone drivers are visible in the window.
• Right-click on the headphone driver and select Update this software
  option.
• Follow the on-screen instructions and wait for the update to complete.
• Close the window after the update is complete and check if the changes are effective.

If the headphone drivers are not visible, I suggest you to download and install the latest and most compatible driver software from the device manufacturer’s website and check if the issue is resolved.

Write to us with the status of the above issue for further assistance. Your reply is most important for us to ensure we assist you accordingly.

Thank you.