Windows 10: Help! weird boot issues

Since my computer was running 7 i upgraded to 10 today. However, I've been having weird boot issues. To simplify things, if I shut down my computer, wait about 5 mins, and turn it back on, everything is fine. However, if I restart the computer I have to do this for driver updates then getting it to boot again is difficult. First, it will boot to a black screen and my keyboard will light up; that's it, no cursor, nothing. Turn it off and on again, the keyboard starts turning on and off, and the fans and drives ramp up and down; it might go into Windows on the 5th or 6th cycle of this happening, it might not. Usually I have to turn it off and again about 4-5 times before it properly boots. Going into sleep mode doesn't cause any problems. If it helps, I have a core i5 4690k, asrock OC formula Z97m mobo, and a gtx 970.
Thanks for the replies!

:)

 

Windows 10 weird font issue

Hi Jason,

Thank you for using Windows 10.

Let us know:

• If the issue is specific to any web-browser?
• Does the issue also occur with documents saved in your computer?

Meanwhile, I suggest you to try in “in-Private” mode and check if it helps. Here is the steps:

• 
  Open Internet Explorer.
  
• 
  Press Ctrl+Shift+P.
  

If the issue still persists, then try login in “Compatibility Mode” and check. See the steps:

• 
  Open Internet Explorer.
  
• 
  Click on Tools icon and select
  Compatibility view settings.
  

Share the results and let us know if you need further assistance and we’ll be glad to assist.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.