Windows 10: How can i boot from a usb?

One day my computer stopped working, it would send me to the screen which offers to restart or advanced options. I tried recovery and resetting the drives on the computer. Since there wasn’t anything I couldn’t recover from the pc I decided i would boot from a usb using the media creation tool windows offers. I set up the flash drive today but I can’t seem to make the pc boot from the flash. Any help?

submitted by /u/mikusf
[link] [comments]

:)

 

How can I remove this virus remnant?

I was also going to suggest Autoruns.

Check to make sure it isn't attaching itself to explorer. It should be the 3rd thing listed in Autoruns, the listing for the Shell. It should just be Explorer.exe. If it is anything else, that might be your problem.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech