Windows 10: How can I enable ping between two Windows 11 machines

I have spent many hours trying to solve what I thought was a printer configuration problem. It turns out that there is something more fundamental going wrong. I can ping my Epson printer from my Windows 11 Pro desktop and a Windows 10 Home laptop, but not from my new Windows 11 Pro laptop. The computers can all ping each other except that the two Windows 11 machines cannot ping each other in either direction. All computers can ping themselves and 8.8.8.8. All have the same 255.255.252.0 subnet mask and all addresses start with 192.168.32 or 192.168.33. The gateway is at 192.168.33.1.The

:)

 

General-Failure while Pinging to Default Getaway - Internet works on machine

So I am encountering a strange problem in my laptop - windows 11.

The problem

I have general-failure while pinging to other machines on my network.

I am connected to the network with WIFI.

I have ping to external Ip like (1.1.1.1), But general Failure when pinging 192.168.0.1 (works from other devices)

As well in my VMware when I run machine in bridge mode I have connection to Default-GW .

What I Tried

• Disabling all fire wall setting windows
  
• adding inbound outbound rules to allow icmpv4
  
• Running the following commands: netsh int ip reset c:\tcp.txt , ipconfig /flushdns
  
• I have enabled network discovery
  
• Disable DHCP and Tried to check the problem with static Ip v4
  

Thank you for reading this!

 

Unable to ping a machine on a Windows home LAN

We have a new Windows 11 Home pc. We have a computer on the same subnet where we share files. Windows firewall has been turned off on both machines. The subnet is 192.168.1.x / 24.

We can ping 192.168.1.110 from the two computers (192.1638.1.75 and 192.168.1.159 can both ping 110). The files are stored on .75. 75 cannot ping 159 and 159 cannot ping 75. So we can't access files from 159.

When I run tracert 192.168.1.75 from 159 it just says "Destination host unreachable" and that's it. No hops at all. Same the other way (from 159 to 75 same message).

I'm at a loss at what else to try! I can surf the web from all the machines and print from all the machines to the network printer.

Any suggestions how to fix this? I have already tried to reset the network connections on 159 with no new progress.

 

Windows 10 ping problem with autoconfig enabled

Hi Denis,



Resetting your Wi-Fi router is one of the maintenance procedures that help refresh your network connectivity. In this way, it could eliminate latency and will return your network status like when you started using the Internet. To
resolve your concern, we suggest that you reset your TCP/IP or
Internet Protocol to its default settings. To do this, follow the instructions below:



Step #1: Run the Network troubleshooter. To diagnose your network configuration, perform the steps below:



1. Open Start menu, then click Settings icon.

2. Click Network & Internet.

3. On the left pane, click Status.

4. Click Network troubleshooter to diagnose and fix network problems.



Step #2: Perform an Internet connection reset via
Command Prompt. To do this, follow the steps below:



1. Press Windows + R to open the Run window.

2. Type cmd, then press Enter.

3. Type the following commands, then press Enter after typing each commands below:

netsh int ip reset resettcpip.txt

netsh winhttp reset proxy

netsh int ip reset

ipconfig /release

ipconfig /renew

ipconfig /flushdns

netsh winsock reset

4. Restart your PC to complete the process.



Step #3: We also suggest that you restart your router and wait for 15-30 seconds then turn it on again. Visit this link:

Fix network connection issues in Windows 10 for more troubleshooting alternatives for your Internet connection. Updating your
Ethernet adapter driver is also suggested there.



Step #4: Ping Microsoft server
then tell us the result through a screenshot.

1. Press Windows key + R to open the Run window.

2. Type cmd, then press Enter. Type ping
www.microsoft.com and press Enter.

• If you receive 4 replies, it means that your connection with the site is working properly.
  
• If you got a request time out, it means that your connection has issues.

Step #5: Disable all other anti-virus programs and enable
Windows Defender only.



Step #6: Check your Internet connection ping status and speed.
You can test it here: www.speedtest.net.



Step #7: If you are using a wireless connection, make sure that there is no interference around your area that blocks its signal. We also suggest that you must be in close proximity with your WiFi source or signal.
If all troubleshooting steps above have no avail, contact your Internet service provider for more assistance.



Let us know if the solution above works for you.