Windows 10: how do I change my WiFi network password

Can I just type over the existing password?

:)

 

how do I change my wifi passcode?

By 'WiFi password' do you mean the password for your WiFi network?

That's a 2-step procedure:

1- Get into your router's administration console and change the password there. (Don't forget to click or tap the Apply or OK button.) Going forward, every device that wants to join your WiFi network has to supply that password.

2- (There's more than one way to do this Right-click on the network icon in your system tray (which probably has a red 'X' on it now) and choose Open Network and Internet settings.

• Under 'Change your network settings,' choose 'Change adapter options'
• Right-click on the icon for your WiFi adapter and choose Properties. That's where you enter the new password
• Once you've done that, wait for a minute or so. The red 'X' will disappear from your system tray and your computer is back on the network.

Don't forget to change the password on every other device on your network, like printers and phones.

 

Help with changing wifi password?

That section is for the password you enter to get into the routers settings. You need to go to your WiFi or wireless settings page, look for the security options, and the WiFi password will be listed as either Password, or Key, or WPA Key.

On my router it's the Password (Network Key) block:

 

Phone won't connect if I change wifi password

This post states that you did'nt Apply the router config after changing the password.

Possible the router memory is bad or not saving new setting
Change the password reboot the router , check after in router if new password saved
If not, reset router to factory default and re setup
check if setting saved after reboot

If do change router password the network will need to be deleted off phone and connect again (or it trying to connect to old saved wifi password ) or could manually change it on phone and save ( as others have stated )

192.168.1.1
home network
Wlan
Configure

Change password and apply , Make sure "Allow new Devices - set to -new stations are allowed (automatically) "

Using same router myself , Free from ISP not the greatest at all *Wink