Windows 10: How do I enable automatic windows repair

2 days ago I was browsing on my laptop but suddenly It crashed and I got the blue screen so I tried fixing it on my own by trying the possible options but none worked so I searched for a solution on youtube it was this one:



https://youtu.be/Wor7mASx3ws


Where I disabled automatic windows repair but after I did that it became even worse...

As you can see this is what I get now and when I press ESC Enter or F8 (F8 options doesn't work)


Please tell me what I should do to activate the automatic windows repair or just start my laptop correctly (if necessary its ok to format the laptop)



:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

Automatic Repair Loop

Hi Charlene,

Your concern regarding the device going into an Automatic Repair Loop can be caused by change on its settings/configuration or broken system files. To effectively assist you with your concern, can confirm if you've made any changes on your device prior to
your concern?

As an initial step to get back into the normal Windows screen, we suggest that you perform a
Startup repair. The repair will attempt to fix any broken components/files which may prevent your device from booting properly. To do this, follow the steps below:

• On theAutomatic Repair screen, select Advanced options.
• Select Troubleshoot.
• Select Advanced options.
• Select Startup Repair.

We'll appreciate if you can send us an update.

 

Windows 10 Automatic Repair Fail

Hello,

For us to better assist you, we'd like to know the following:

• What is the make and model of your device?
• Are you getting any error messages when your computer is attempting to perform the Automatic Repair?

Meanwhile, we recommend performing the suggested steps on this article
to troubleshoot black screen issues on Windows 10.

We look forward to your response.

Regards.