Windows 10: How do I fix this pc error?

Hi, I accidentally deleted something that was not supposed to be deleted in my system config. Now when I try logging in my pc says that “something happen to your pin is unavailable”. When I try booting in safe mode it only has power off option. What do I do?

:)

 

Network PC Win10 1903 issue Error Code 0x80070035

i followed these steps, but no matter what, i couldnt stop network list services.

"windows could not stop the network list service on local computer. error 1061: the service cannot accept control messages at this time".

also, which pc am i meant to be running this fix on? both PC's reported error 1061.

 

ATIFlash 'ERROR 0FL01' FIX

If you have been suffering messages such as 'Adapter not Found' and 'ERROR 0FL01' or even 'Invalid Adapter or BIOS Selected' when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you've been looking for.

--------------
Required Files
--------------
*HP USB Disk Storage Format Tool
http://h20000.www2.hp.com/bizsuppor...swItem=MTX-UNITY-I23839&jumpid=reg_R1002_USEN
--------------
*USB Boot Files
http://www.4shared.com/file/43544416/39060a9e/HPUSBFW_BOOTFILES.html?s=1
--------------
*ATIFlash
http://www.techpowerup.com/downloads/1731/ATIFlash 3.79.html
--------------
*Your Video Cards Bios
http://www.techpowerup.com/vgabios/...re=&manufacturer=&model=&interface=&memSize=0

------
Part 1
------
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool

Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)

Step 3 Copy ATIFlash files USB Boot Drive

Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
------
Part 2
------
Step 1 Boot into 'Safe Mode' (by pressing f8 before booting into Windows)

Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager 'Display Adapters' and Uninstall (including Software when prompted)

Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
------
Part 3
------
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)

Step 2 Reboot into your Mobo's Bios

Step 3 Once in your Mobo's Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot

Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist

Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can't be flashed until unlocked

Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed

Step 7 Once your Bios has been flashed simply 'Ctrl+Alt+Delete' to restart your PC

Step 8 Go straight back into your Mobo's Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
------

 

Windows error 8024402F Fix?

You can fix this problem easily please follow the steps which is using in this video "youtu.be/TXW64QDpGoI"