Windows 10: How do I fix this?

submitted by /u/SweatyPepsi67
[link] [comments]

:)

 

i update bios then black screen ???? pls help me 980ti

@smoka Great you fixed it and would be interesting to know how you did it. Care to list the basic steps you took to do it so that it can help others stuck in the same situation?

 

How do I fix my USB drive?

Hi,

Thank you for posting your query in Microsoft Community.

I understand your concern and will assist you to resolve this issue.

I suggest you to follow the methods below and check if it helps.

Method 1: Run the Hardware and devices troubleshooter

Windows 10 has a built-in troubleshooter to check and fix issues with hardware and devices. I would suggest you to run this troubleshooter to check if the issue is with your USB Port. Refer these steps:

• 
  Press Windows key +X, select Control panel.
  
• 
  Change the view by option on the top right to Large icons.
  
• 
  Click on troubleshooting and click on the view all option on the left panel.
  
• 
  Run the Hardware and devices troubleshooter.
  

Method 2: I suggest you to remove USB Drivers and re-install the drivers again and check if it helps.

• 
  Open Device Manager.
  
• 
  Expand Universal Serial Bus controllers.
  
• 
  Note: You might have to scroll down the list to find this item.
  
• 
  Right-click the first USB controller under
  Universal Serial Bus controllers, and then click Uninstall to remove it.
  
• 
  Repeat the above step for each USB controller that is listed under
  Universal Serial Bus controllers.
  
• 
  Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and install the drivers.
  

Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.