Windows 10: How do I use command prompt to repair my Windows image without being able to log in?

Discus and support How do I use command prompt to repair my Windows image without being able to log in? in Windows 10 Gaming to solve the problem; I have posted here before about the same issue, but it has developed. I can no longer access my computer outside of the error screens it gives me when... Discussion in 'Windows 10 Gaming' started by I Don't Have the Money, Feb 2, 2023.

  1. How do I use command prompt to repair my Windows image without being able to log in?


    I have posted here before about the same issue, but it has developed. I can no longer access my computer outside of the error screens it gives me when it doesn't boot correctly. I have been running DISM to check, scan, and restore health, plus sfc scannow. RestoreHealth can't fix whatever file corruptions there are because of error code 0x800f081f. The guides it have seen for this require you to download a file from Edge, but it's incredibly unlikely that I'll be able to normally log in. All I can really do is just continuously restart my computer until 1 I get an error screen that actually

    :)
     
    I Don't Have the Money, Feb 2, 2023
    #1
  2. cwtech Win User

    command prompt will not open in safe mode with command prompt

    I am repairing a laptop for a friend and I need to access windows in safe mode and the owner has forgotten the password to the main user. I tried logging on with the administrator profile in safe mode but it is not showing up so I was going to use command prompt in safe mode with command prompt but command prompt will not open when I boot that option. Does anyone have any hints for me to figure this out?
     
    cwtech, Feb 2, 2023
    #2
  3. cwtech Win User
    command prompt will not open in safe mode with command prompt

    Would I just follow the same steps within safe mode after hooking up to the other system?
     
    cwtech, Feb 2, 2023
    #3
  4. Kursah Win User

    How do I use command prompt to repair my Windows image without being able to log in?

    Repair Windows 7/8/10

    Repairing Windows 8

    Further improving on previously deployed OS repair methods, Windows 8, 8.1, Server 2012 and 2012 R2 further allowed advanced repair where an in-place upgrade or total re-install would be required on previous operating systems. In all honesty, before Windows 10 implementation, this was arguably the easiest OS to repair for a couple of years by running more basic commands.

    This has since been advanced to more closely match Windows 10/Server 2016 repairs but with the below information I hope to guide you through performing these advanced tasks more easily!

    Spoiler: Windows 8/8.1 Repair DISM

    If CHKDSK and SFC fail to repair the issues with the system, then it this is your next option and besides restoring from a previous backup might be the second-to-last option before re-installing the operating system. We will utilize DISMfor this next repair option.
    • In some instances, you won't need the OS ISO to perform the DISM image cleanup. You can attempt this on any OS from 8-10 by using the following command in elevated CLI: DISM /Online /Cleanup-Image /RestoreHealth
    • In many cases now due to some changes Microsoft made, you'll need to have a copy of the OS ISO available. The ISO will need to be a standard deployment variety that contains Install.WIM in the Sources directory, otherwise the process will fail. Once you have the correct ISO, mount it in Explorer (can do this natively on Microsoft Windows 8.0+), verify the drive letter, verify Image.WIM in the Sources directory.
      • To download a Windows 8.1 ISO from Microsoft, click here.
    • Enter the following in elevated CLI: DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess
      • X = drive letter of mounted ISO. Change to match the appropriate drive letter.
      • Say I had the Install.WIM located in C:\Images, I would type the following command: DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:C:\Images\Install.WIM:1 /LimitAccess
    The DISM scan can take a while, often times longer than an CHKDSK or SFC scan. To speed up the process, have the Image.WIM on a faster flash media or on local storage rather than disc media. This will help greatly. In many cases one or two runs of this command will repair most issues I've found with Windows 8/8.1.

    Once the DISM repair process has been found successful, or not, I will perform a reboot. If the repair was unsuccessful, this will be when I attempt a second pass. If the second pass fails, it is time to move onto the next solution.

    However, if the DISM repair passes at any point, reboot the system and then perform an SFC to confirm no further issues are found or need resolved. This step is likely overkill for those not seeking to do optional steps.

    Operating System Refresh

    It should be noted that in the event DISM fails to repair the system, then an OS refresh would be the next suggestion if the deployed that could save the user's files and OS deployment.

    This feature has been an available feature since Windows 8 launched in 2012. The biggest benefit with this option over Windows 7's in-place-upgrade is not necessarily requiring the OS installation media to perform the repair.

    If the system is an OEM, an OS refresh from the OEM partition may mean a reinstall of the OS and loss of user data but the restoration of OEM software and bloatware. But you can still choose a manual OS-only refresh without the bloatware if you take the correct steps.

    The best choice in my opinion is to run an OS refresh procedure from the advanced boot menu or you can run the installation media while in Windows to perform and Upgrade installation, this will keep your files and settings but replace Windows files and components.

    To access the advanced boot menu for Windows 8, there are a several options.
    • When choosing restart from the OS GUI, hold down SHIFT and click restart. This method will work even if you cannot log into a profile on the system which makes it very useful in some situations.
    • If logged in, access PC Settings, and click Restart Now under Advanced Startup.
    • If logged in, open a command prompt window and type shutdown /r /o /t 0 which will initiate a reboot into the advanced menu right with no delay. Without /t 0, there will be a 60-second delay. The number value after the /t is delay seconds.
    Once you've reached the advanced boot menu, choose Troubleshoot. From there you can choose to Refresh your PC, Reset your PC and Advanced Options. For this repair, we want to choose Refresh your PC. It's description reads "If your PC isn't running well, you can refresh it without losing our files." That is exactly what we want to accomplish here!

    Follow the prompts and processes, and after the refresh installation and rebooting, you should be greeted with a login screen back to your profile in your stable OS environment. At this point you should be able to use the system as intended, if in doubt then re-run the SFC and DISM scans.

    In-Place Upgrade

    If CHKDSK, SFC and DISM fail to repair the issues with the system, yet you can still boot to the Windows desktop, then the next option is to perform an in-place upgrade. This is more in-depth than an Operating System Refresh. It re-installs most of the operating system's core image and critical files without losing your profiles, data or programs, but do expect to lose some settings. In many cases this process can fix some major issues and refresh an otherwise corrupt and issue-ridden OS installation back to something stable and usable.

    Time to close the CLI windows and get back into the GUI, unless you want to deploy Windows through CLI. You'll have to source a different guide for that process!

    Requirements to perform an in-place upgrade:
    • Must have installation media that matches the installed OS version and type. This applies to both Windows and Windows Server.
    • Must be able to get to the desktop on the affected system to correctly initiate this process, booting to the media will not allow an upgrade to be performed.
    That last rule is the frustrating part of this repair process if you cannot get that far, backup what you can and do a fresh installation. Otherwise proceed.
    • Start the process by using autorun or manually running setup.exe from the installation media.
    • Windows 8/Server 2012+ can mount ISO's in Windows Explorer, you can use that instead of physical media options to perform this task.
    • You'll come to the installation window, the options will be Upgrade or Custom. Choose Upgrade. This is critical as choosing custom will force you to overwrite, append or wipe out the current install rather than performing any kind of repair.
    • Follow the on-screen prompts, which should be very few for you to interact with. The overall process looks and is the Windows install GUI. Once it is completed, the system will automatically reboot (may need to more than once).
    • After the reboot(s) after the in-place upgrade you should have a fully functional Windows without issues or corruptions.
    Performing an in-place upgrade makes sense, and gives you a stable and clean running operating system when there's an issue or corruption you just can't fix but things aren't broken enough to warrant a fresh installation. The point of this process is to refresh the Windows OS files but retain your data, programs, and settings. That is precisely what the in-place upgrade procedure accomplishes.

    I should also add that this process can be accomplished remotely as well, from start to finish. I have done so with persistent LogMeIn, ScreenConnect and Teamviewer installations on various remote systems I have performed this task on, RDP should work as well. Being able to do this level of repair remotely is a huge benefit to any sysadmins out there looking to keep a client happy and perform that "remote magic" IT guys are known for.


    **If at this point your issues are not fixed, then there is something else occurring that is causing the issue be it Malware, hardware, drivers, etc. Please refer to the OP in this thread to run through some of those tests and diagnostics, or create a new thread seeking help and stating what you've tried.**
     
    Kursah, Feb 2, 2023
    #4
Thema:

How do I use command prompt to repair my Windows image without being able to log in?

Loading...
  1. How do I use command prompt to repair my Windows image without being able to log in? - Similar Threads - command prompt repair

  2. How do I use command prompt to repair my Windows image without being able to log in?

    in Windows 10 Software and Apps
    How do I use command prompt to repair my Windows image without being able to log in?: I have posted here before about the same issue, but it has developed. I can no longer access my computer outside of the error screens it gives me when it doesn't boot correctly. I have been running DISM to check, scan, and restore health, plus sfc scannow. RestoreHealth can't...
  3. How do I make a windows recovery environment using command prompt?

    in Windows 10 Gaming
    How do I make a windows recovery environment using command prompt?: I'm trying to make a windows recovery environment, so I can reset my computer that continuously blue screens, but the reagentc/X command isn't doing anything, whenever I try to enable it, it goes something like this image attached if anyone knows how to fix this, help would...
  4. How do I make a windows recovery environment using command prompt?

    in Windows 10 Installation and Upgrade
    How do I make a windows recovery environment using command prompt?: I'm trying to make a windows recovery environment, so I can reset my computer that continuously blue screens, but the reagentc/X command isn't doing anything, whenever I try to enable it, it goes something like this image attached if anyone knows how to fix this, help would...
  5. Automatic Repair Command Prompt

    in Windows 10 Installation and Upgrade
    Automatic Repair Command Prompt: I am trying to repair my computer in Automatic Repair on Windows 10. However, when I try to run command prompt in this mode it insists I need an administrator account, which i do not have and was actually going to create with command prompt. How do I work around this?...
  6. Not being able to open PowerShell & Command Prompt as Administrative

    in Windows 10 BSOD Crashes and Debugging
    Not being able to open PowerShell & Command Prompt as Administrative: Hi, I have the problem of not being able to open the PowerShell. Whenever I click on it, I just return to my desktop after 2 seconds and it never opens. Command prompt doesn't open as administrative and the same thing happens as in the PowerShell. It does open without...
  7. Command Prompt to Repair Disk

    in Windows 10 Support
    Command Prompt to Repair Disk: I found this page when searching for a solution to my BSOD: Can you open Elevated Command Prompt from Command Prompt? I started following zbook's instructions but got immediately confused because for the C Directory it showed my D drive (which I read elsewhere is to be...
  8. How do Software companies use Windows Command Prompt?

    in Windows 10 Customization
    How do Software companies use Windows Command Prompt?: I'm curious as to why do software companies use windows command prompt? Like what are the most common commands they use and why? What can I do in command prompt?...
  9. Command (s) in Windows 10 Home Repair Command Prompt without reinstalling it

    in Windows 10 BSOD Crashes and Debugging
    Command (s) in Windows 10 Home Repair Command Prompt without reinstalling it: Hello, Dear Sir, please give me a command (orders) in Windows 10 Home Repair without prompting to reinstall it from the beginning. Wait for response! A wonderful day!...
  10. Command Prompt Windows Repair Disc

    in Windows 10 Support
    Command Prompt Windows Repair Disc: Is there a way to use the Command Prompt on Windows Repair Disc without a working keyboard? 12712