Windows 10: How to cure Print Spooler problem after installing Updates KB4524147 and KB4522738?

Installed Updates KB4524147 and KB4522738; now computer cannot find printers, try to PRINT gives: Operation could not be competed (0x000006ba). The local print spooler server s not running , please start spooler or restart machine.

Restarted computer 3 times without solving problem. If go to SERVICES-Print Spooler, set to automatic and shows it as stopped; if you are fast and have Control Panel/Printers and app you want to print from open, you can click Service-Print Spooler start, jump to set default printer, back to Service-Print Spooler, click start, jump to app to select printer but is stops again before preview can load and settings chosen. MS Tech Support Manila says problem needs a Level 2 Tech so they will call me back in a WEEK! Anyone have a fix now?

:)

 

KB4524147 After install no printer would work.

After installing KB4524147 all of my installed printers were removed. Unable to install printers. Restarted pc, restarted print spooler, still unable to add printer. Uninstalled KB4524147 rebooted and printers are back and I'm able to print again.

 

Issue after installation with print spooler

Hello,

Thank you for keeping us posted.

I certainly understand your concern and will try my best to help you.

I really appreciate all your efforts in trying to fix this issue.

I would suggest you to try the steps given below and check if that helps.

Note: All the steps mentioned below holds good for windows 10 as well.

If print spooler keeps stopping in Windows 8.1,
I would suggest to follow the steps given below.

• 
  If the print spooler is not responding to your print commands and print is not happening when printer is fine physically (No paper jam or any error indications on printer hardware). These methods will help
  to clear the pending print jobs (print queue) and hanging spooler service.
  
• 
  Clear the print spooler files where the Operating Systems store printing jobs temporarily, deleting these file will allow the print spooler to start freshly and run smoothly next time.
  
• 
  Go to C -> Windows -> System32 -> Spool -> Printers and delete all files inside this folder. This is the location OS keeps the printing jobs before sending
  to printers. Once you delete these files, print queue will be cleared. The same location is applicable for latest Windows 8 and 8.1 too.
  

If the problem persists, follow the steps given below.

• 
  Go to services under Computer Management.
  
• 
  Double click Print Spooler service and go to
  Recovery tab. Here we can set what that service should do when it fails.
  
• 
  Select ‘Restart the Service’ in Subsequent Failures field. So, it will try restarting print spooler service whenever it fails.
  
• 
  Go to ‘Dependencies’
  tab and make sure all depending services are started. Luckily, only one dependency service for print spooler service which is
  Remote Procedure Call (RPC) service.
  
• 
  Check the RPC service in services and make sure it’s already started.
  

If the issue still persists, the last step would be to check for the printer drivers. If the printer drivers are not installed properly, I would suggest you to follow the steps given below and check if that helps.

• 
  Delete all unwanted printers from your computer.
  
• 
  Make sure all printers are installed with proper drivers.
  

Additional Information:

Please refer to the article given below and check if that helps.

Fix printer problems

http://windows.microsoft.com/en-us/...1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

Note: The above article will
help you identify and fix common printer problems in Windows. Printing problems can be caused by cables that aren’t connected properly, problems with wireless adapters or settings, damaged or incompatible printer drivers or missing updates.

I hope this information is helpful.

Please do let us know if you need any further assistance, we will be glad to assist you.

Thank you.

 

Print Spooler Issue

Hello Sree,

For step by step instructions on how you can manually start the Print Spooler Service, follow these:

• Click Windows tab.
• Type Control Panel > System and Maintenance
  > Administrative Tools.
• Double click Services.
• Right click to the Print Spooler service > Properties.

However, we suggest you can refer to an answer given by Prabhavathi Patil on this

thread.

We also recommend that you update the driver for your printer.

Let us know if you need further assistance.

Thanks.