Windows 10: How to disable USB components' power management settings

How can I set up a Power plan in which all Power Management options, like the wake up etc., is cleared / disabled in the Power Management, HID devices?

:)

 

Disable "Power Surge on USB" message

Hi David,

If the system detects that a USB port is going over the power limit, the system is set to notify the user by default. However, since you mentioned that you're still getting the notification after you disabled the alerts, we suggest following these steps
instead:

• Right-click the Start button.
• Choose Device Manager.
• Click the drop-down arrow beside Universal Serial Bus controllers.
• Right-click anything that has USB Host Controller in its name, and select
  Properties.
• Go to the Driver tab and select Uninstall.
• Restart your computer. The driver will be reinstalled automatically.

Let us know if the error notification disappears after following these steps.

 

USB settings in Power Plan Options on Windows 10 is missing, how to restore it?

As per the below suggested steps I am trying to disable the USB in USB selective suspend setting in my Dell laptop with Windows 10 Home. however, I do not find the USB Settings at all in two modes Balanced mode or Dell (Active) mode under change advanced
power settings. How to restore it?

USB Selective Suspend Settings, follow the steps below:

1. Press Windows + X.
2. Choose Power Options.
3. Select Choose when to turn off the display.
4. Open Change advanced power settings.
5. Expand USB settings and USB selective suspend setting.
6. Select Enabled (default) or Disabled.
7. Click Apply, then OK.

 

Disable USB Power

When I turn off my Windows 10 machine, USB devices remain powered on. I would like them to power off.

I have already:

1. Disabled USB selective suspend
2. Disabled Fast Start
3. Disabled "Allow the computer to turn off this device to save power" on the Power Management of the USB Root Hub Properties, as well as on the Generic USB Hub Properties and the Intel USB 3.0 eXtensible Host Controller.

How is this resolved? Any help is appreciated.

OS Name: Microsoft Windows 10 Home

Version: 10.0.19041 Build 19041