Windows 10: How to fix Audio for wireless headphones in windows 11

How to fix this issue, Bluetooth headset only shows one source in the games, for example it only show spinbot ranger hx300, it is not showing stereo or handsfree like in win 10. How to fix this issue.. I don't want to disable handsfree in device manager, I just want to see two input sources in games stereo and handsfree

:)

 

Bose wireless headphones not recognized.

Remove headphones from Device Manager

Sometimes there might be issues with Bose Bluetooth headphones on Windows 10, but users reported that this issue can be fixed simply by removing your headphones from Device Manager. To do that, follow these steps:

Press Windows Key + X and choose Device Manager from the list.

device-manager

Locate your headphones in Device Manager, right click them and choose Uninstall.

uninstall-driver

After you’ve deleted Bose headphones from Device Manager, they should appear as headphones in Bluetooth devices list. Try pairing your PC with Bose headphones, but if the pairing doesn’t work you’ll need to delete the headphones’ memory. To do that, follow
these steps:

On your Bose headphones slide the Power button up to the Bluetooth symbol and hold it there for 10 seconds.

Now headphones should appear in the Bluetooth devices list, and you’ll be able to connect them to your PC.

Some users are suggesting that you don’t need to delete the device from Device Manager, you just have to delete the headphones’ memory by following the instructions above.

Solution 2 – Uninstall your audio driver and install the latest audio driver

If you’re using wired Bose headphones, you might want to try removing your audio driver in order to fix any potential issues. To remove an audio driver, just go to Device Manager, locate your audio driver, right click it and choose Uninstall. After uninstalling
the audio driver, it’s recommended to go to your motherboard or sound card manufacturer’s website and download the latest audio driver.

Few users also suggest installing audio drivers by using the compatibility mode. To do that, follow these steps:

Locate the audio driver setup file and right click it. Choose Properties

Navigate to Compatibility tab and check Run this program in compatibility mode for.

Select one of the previous versions of Windows, for example Windows 7, and click Apply and OK to save changes.

Run the setup file and install the latest audio drivers.

Use a Bluetooth adapter / update your Bluetooth drivers

Problems with Bose headphones can be caused by Bluetooth drivers, so make sure that they are up to date before connecting Bose Bluetooth headphones. If you have the latest drivers, but the problem still persists, you might want to use a Bluetooth adapter. Users
reported that after buying a Bluetooth adapter and installing the necessary drivers the issue was resolved. While buying a Bluetooth adapter, make sure to choose one that comes with with a driver CD in order to avoid any further Bluetooth issues.

 

Windows 11 messed up audio devices

Hey all, I just upgraded to windows 11 from 10, and now all my audio devices are messed up. I used to have it as my speakers that are plugged into the front audio port, and my headphones/mic plugged into the back. They were listed as 2 separate devices that I could toggle between. Since I went to 11, it is now showing as 1 audio device only and the audio plays from speakers and headphones at the same time. any suggestions on how to fix this? Thanks

 

Move audio to one side for speakers but not headphones

Hello J1mmyth3F1sh,

Thank you for writing to Microsoft Community Forums.

• Is your headphones getting detected in the Playback settings?
  
• Are you trying to play the audio on both Speakers and Headphones at the same time?
  

Ideally, if you have configured Sound settings to play on your left speakers, the same goes with the headphones. The sound starts playing only on the left side of your headphones according to the settings changed.

Meanwhile, we can try configuring the headphones and change the balance level in the sound settings and see if it works. Kindly check with the steps listed below and see if it helps.

Method : Run audio test for your headphones.

• Open Control Panel from the Start menu and click on
  Sound.
  
• In the Sound window, click on your
  Headphones and select Configure option at the bottom left.
  
• By running the test, check if both sides of your headphones are working fine.
  

If that doesn’t help, I would suggest you to check with the audio balance by following the steps listed below:

• Open Sound settings from
  Control Panel, and right click on the Headphones to open its
  Properties.
  
• Click on Levels tab and select
  Balance button. In the Balance window, you can use the slider to balance both left and right headphones equally.
  

However, I commend and appreciate you for recognizing this behavior. This is a valuable suggestion as there may be other users with a similar requirement. Hence, I suggest you to leave a
Feedback for this product so
that our developer team can look into this and check if it can be implemented in the future updates.

Regards,

Mala S

Microsoft Community - Moderator