Windows 10: How to get past inaccessible boot disk BSOD code

Im stumped, Im stuck in the loop and only have access to X driveAfter fresh installing windows 10 on my laptop it was working and then turned off, turn on later and stuck in this loop. When I run list disk / list volume There are no fixed disks to show, There is no disk selected to list partitions and There are no volumes are shown after using the commands.I took the SSD out and plugged it in to another PC and it reads the drive but its completely wiped and needed to be formatted, when re inserted into the laptop its acting like it cant read it.The previous owner apparently spoofed the hardwar

:)

 

Windows 10 BSOD stop code inaccessible boot disk.

"5 days ago I got the windows 10 BSOD with the "inaccessible boot disk error", and I found the command line,

diskpart...(Enter)

diskpart list volume...(Enter) To discover the letter assigned to the OS partition. (image)

dism /image:\ /get-packages...(Enter) lists all of the updates and the date of same.

dism /image:\ /remove-package /packagename: (enter the package name you wish to remove, usually the last one or two with the words "rollup" somewhere in it)...(enter)

you will see the progress bar telling you the package is being removed. when it reaches 100%........it will say the process is completed.

You may then reboot back into Windows 10. If that doesn't happen repeat the same process and remove the next package up...and then reboot into Windows 10.

This procedure fixed my wife's computer perfectly...however, 3 days later the exact same thing happened. BSOD with stop error "Inaccessible Boot Disk".

I started the same procedure and discovered the two packages I had removed, were back again. They were not however labeled "Roll Up" updates, (Packages)

I removed the last two of them again successfully but unfortunately this time it did not reboot into Windows 10. I checked by running the get-packages command again and those I removed were indeed gone.

Now What???

please help if you can and, a huge THANK YOU if you do.

 

Windows BSOD - Inaccessible Boot Device

Ever since December after a windows update, any time I re-boot I get a BSOD - Inaccessible Boot Device, and have to go back to a restore point. Currently my update log shows KB4054517 failed (0x80070643 on 12/12/17, Cum update on 1/5/18 filed then succeeded,
and all future updates through Cum update KB4056887 on Jan 19th succeeded. Windows runs fine with no errors, but having had to go back to a restore point 6 times in the past 6 weeks, if I reboot I will get the same BSOD and have to restore again. Any suggestions
on how to fix the inaccessible boot device error I keep getting??

 

BSOD - Inaccessible Boot Device

The reset save files equivalent if successful should be the quickest method to get you backup and running.

The backup files then clean install is the best option as you fix many problems and start fresh.

The command prompt commands are all trial and error.

Code:

Code:

Code:

Code:

Code:

Code:

Code: