Windows 10: How to make the most of my SSD drive?

I have a laptop with a 120 GB SSD drive and a secondary 1TB HDD. I moved my Windows file folders (documents, images, downloads etc.) to the HDD. I read that an SSD is significantly faster than the other type of drive.

So my question is whether i have to do something specific to make the most of its speed. Like, if I want a program to run faster do I have to install it at the SSD instead of the HDD? When redering in a video editing program, should i choose an SSD location to make the rendering happen faster? Im generally confused on when to choose the HDD and when the SSD one.

submitted by /u/drewsens
[link] [comments]

:)

 

Cloning to SSD then swapping drive letters


@SamHobbs
What you want done is very simple and can be done in short period of time. Here's my suggestion:
There's 2 modes that Windows can be installed: UEFI and the old legacy MBR. Open Disk Management, look at the disk where your C drive is, if there's a

1. EFI System Partition, your Windows was installed using UEFI.
2. System Reserved partition, your Windows was installed using MBR

Next, Connect your SSD to an available Sata port (no need to format or do anything). Download: Macrium Reflect Free . Install and run. Follow the steps below:

1. From Macrium, click on image this disk under your C drive and save it to either an Internal or External Drive. This will create a single backup image of the whole disk containing your C drive.
2. Again, from Macrium, click on Restore tab and select the image created from step 1, Select your SSD as the destination drive, click Next->Finish
3. Exit Macrium. If your Windows was installed using MBR, Open disk management and make sure the SSD is marked "Active" else go to next step.
4. Shutdown your PC. Disconnect the HD containing Windows C drive then connect your SSD to it.
5. Reboot. Your PC should boot and the Windows should have C as the drive letter.

NOTE: The procedure above is to backup your Windows to an image file then copy it back to the SSD. This ensures proper cluster size aligment for the SSD. In addition, Macrium also perform Trimming for the SSD. This is more preferable than cloning.

 

Upgrading HP SSD drive on HP 750-524

I purchased an HP Envy tower with a 128Gb SSD which is where Windows is installed, I have purchased a new 1TB SSD drive that I would like to replace the 128 GB drive with. My machine did not come with the Windows 10 Media, what steps do I need to take before
I install the new drive and install windows.

• Where do I get the Windows 10 install
• What steps are needed to create an Install disk
• Do I have to deactivate my old install before removing the old drive.

Please let me know if there are any other considerations.

Best Regards,

Wes

 

Installing an SSD drive on my desktop to use as the C bootup drive

What are you talking about, I have Samsung 830 for 5 years and its still running great there is no issue with NTFS and SSD

To the OP all you have to do is use Macrium Reflect to clone your disk to your SSD you'll have to option to shrink your C partition before you start the actual clone check out this video
it walks you through step by step