Windows 10: HP Envy Blue Screen Stop Code

Hi,


In the past month I've been having an issue with my laptop where it will either restart randomly, or when I shut it down normally, and it will show the blue screen with the ':'. I've had multiple different stop codes, but the only two I managed to record before the blue screen disappeared are PAGE_FAULT_IN_NONPAGED_AREA and ATTEMPTED_WRITE_TO_READONLY_MEMORY. Often when this happens it corrupts any documents I was working on, and I have noticed that if I have Google Chrome open it will crash if this is going to happen. After it happens my laptop seems to go back to normal, and I have no option for the 'Advanced Options' that have been mentioned on other posts. All updates are up to date. Let me know any more information you need.


Thanks.




:)

 

Windows 10 - HP Envy - Daily Blue Screen of Deaths

I would take the laptop back asap and insist that there is something wrong. The WinDBG result is simply telling you that there is a hardware error, this is a 0x124 stop code and the CPU which reports the error is an AMD device.

It is often quite difficult to pinpoint the component which is giving rise to the problem. It could be motherboard or CPU or memory so you just have to work your way through the tests until you find something. A good confirmation that it is hardware is if the system crashes in safe mode. Safe mode does not start the non-Microsoft drivers so it helps to rule out a driver related BSOD.

In the event log you have a number of hardware related errors like this:
Attachment 173474

Below are the full range of tests we recommend:


STOP 0x124 Troubleshooting [/i] Read carefully before proceeding.



Warning

If you're overclocking your system, revert back to stock clocks now.





Note Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




ONE [/i] CPU TEST
*Arrow Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums



Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.




TWO [/i] RAM TEST
*Arrow Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.




THREE [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR [/i] GPU TEST
*Arrow Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.

 

Windows 10 - HP Envy - Daily Blue Screen of Deaths

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




ONE [/i] CPU TEST
*Arrow Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums



Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.




TWO [/i] RAM TEST
*Arrow Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.




THREE [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR [/i] GPU TEST
*Arrow Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs. I called into the retailer yesterday and although the laptop isn't even two months old, i have to send it back to the central repair centre. It's not ideal as i use it for my business. Before i do send it back i just want to make sure i have checked everything else.

Regards

 

HP Envy x360 with 1440p screen?

So I bought a refurb HP Envy x360 with the AMD FX 9800P and recently discovered I could set the screen resolution to 2560x1440 despite HP advertising this machine as only being capable of 1920x1080. Has anyone else bought one of these and found they could change the resolution to 1440P? I was thinking maybe since mine is a refurb that it was originally returned for some kind of screen issue and they replaced the screen with whatever they had lying around that day, which could well have been a screen meant for a Spectre, and not an Envy, since the Spectre does come with a 1440p screen. Would a mistake like this even be possible? It came in an Envy box and it says Envy everywhere on the laptop where it should say it. There is no external evidence that this might actually be a Spectre and not an Envy. So is this a fluke or all of these capable of displaying 1440p instead of being limited to 1080p as advertised?