Windows 10: HP Printer Driver Download in Microsoft 10

Hello, I need some help to download an updated HP Printer Driver. I keep getting a Microsoft message stating I need to change my Settings to allow an App from somewhere other than Microsoft. I just cannot figure this out. ??

:)

 

HP All In One Printer/Scanner/FAX J6400 series - Can't scan w/Windows 10

I have done everything that you have suggested and Windows 10 still will not allow me to scan. All my HP drivers are current and the HP online help process indicates that my printer is fine and online. Any other suggestions?

 

Microsoft drivers for HP printers

Windows 10 up-to-date.

HP Probook 450 G2

HP Officejet Pro 8000 Wireless.

After finding a post where it was better to use MS drivers for the Realtek audio device (on an HP Probook as it happens), I wondered if Win10 can supply adequate MS drivers for the HP Officejet 8000? Historically it has been essential to install the HP drivers.
But maybe that has changed?

My HP Probook is showing an error in Devices and Printers (D&P) which is "driver for Hp Officejet Pro A809 is not installed".

This is after the HP drivers were installed and the conundrum is that the printer works fine.

But there are other annoying issues which may or maynot be related eg

• The D&P dialogue taking a minute or so to display
• The settings Find a Setting field likewise taking 30 seconds to show any results.

 

Can't get my HP Printer to work on Windows 10

Greg,

I am having the same issues with my HP3600n Color LaserJet not working after upgrading from Windows 7 to Windows 10. I have followed your November 8th Post, details below:

Step 1 - Plug printer in by USB, power on printer, watch for animation in System Tray shown while searching for driver.

• There was no animation in the system try after plugging in the USB cable and powering on the printer.

Click on it to monitor driver install. It may ask to go to Windows Update to pull in the driver.

Step 2 - Type Devices and Printers in Start Search box, open location, do you see the printer there?

• Yes. The printer is listed.
• Set as Default, if it won't print right click to Troubleshoot.
  • The printer responds to a print request but, instead of printing the sent job it prints out a PCL error as follows:

PCL XL error

Subsystem KERNEL

Error: IllegalTag

Operator: 0x98

Position: 3

Step 4 - Typed "Update" in Start Search box, Check for Updates, install all including Recommended, expediting restart when requested, going back to Check for more until none are offered.

• Received notification "Your device is up to date. Last checked: Today, 2:52 PM (it is now 2:52 PM)

Did the printer driver arrive? No.

Step 5 - Download the basic driver (if no scan) or software (if scanning needed) package for the printer from the HP Support Downloads webpage for your exact make/model. Install the software with the printer USB unplugged, wait for it to prompt to plug
it in.

Let us know how this works. It may require a few extra steps.

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03515691

• Downloaded Dot4x64.msi from HP support. Installed the software (with printer USB unplugged), plugged it in when prompted. This driver did not work. I received the same KERNEL error as above.

• Downloaded HP_CLJ3600_64Bit_HB.exe from HP support. Installed the software (with printer USB unplugged), plugged it in when prompted. This driver did not work. I received the same KERNEL error as above.

So, at this point, I have followed all steps with no success. I can "see" the printer in Devices and Printers however, the printer ICON doesn't look like a HP3600n, it is the Windows default printer ICON. Normally when the properly drivers are installed
the ICON is customized to look like the installed device or printer.

Do you have any other suggestions that I might try?

Thanks!

Dave Williams