Windows 10: I can't boot from usb

So I updated to the newest windows about a month ago and the update failed and now none of my windows apps work. They all say they aren't connected to the internet and give an error code. I went to reset my computer and I couldn't because I had recently made the mistake of copying my old files along with windows from my old ssd to a new m.2. So I went on another computer and use the Media Creation Tool to make a bootable usb with windows and plugged it in to try to do reinstall from that but all I get is a blank screen with a white dash in the upper left hand corner. I've tried 3rd party software, switching between FAT32 and NTFS , and I'm completely lost now. I don't know what to do please help

:)

 

USB boot for bios update

Did the first step. It already doesn't work. Note the capacities and drive letters M:/N: The HP utility is about to format my raid-1 volume containing my 2 750gb drives. It thinks it's the usb stick. I can not select any other drives in the HP utility. My 512mb usb stick is U:.

Any other suggestions?

 

Help with USB Boot Image

I am trying to boot from my USB flash drive. I followed the instructions step for step that are in the article on this website. I downloaded the HP program and the USB Image zip file. I ran the HP flash program and pointed it to the folder where I unzipped the USB Image files to. I then copied all the files over to the USB memory stick as instructed. When I restart my computer and press F12 to go to the boot menu I have 3 options: SATA hard drive, CD-ROM drive, or USB Device. So I choose USB device and when it reads the USB memory stick all I get is the error "Non-system disk, replace and hit any key" Its like the USB memory is missing some system files or it doesnt have the master boot record or something. Somebody please HELP!!! I want to flash the bios in a new video card and I have to boot to DOS and I dont have a floppy drive and I have Win XP so a USB boot is probably the best option I have.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk