Windows 10: I CHANGED THE PRINTER SETTING ON A DOCUMENT, NOW ALL PRINT SETTINGS ARE THE SAME, I WOULD...

NEED HELP IN RESETTING PRINTER SETTINGS IN WORD 2010 TO DEFAULT THANKS

:)

 

Win 10 changes printer settings if not a default printer

I understand this. My question was a work around that. If you are printing multiple documents and having to go in between label printer and regular printer, setting the printer default manually is an extra step that will not suffice due to it's inefficiency.
Other suggestion?

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

Unable to perform print and change the print settings.

1. The one I am using now is the HP15 laptop.

2. Trying to print from my Epson 320 wireless. It stopped last week and I have left it alone until now as I had some documents that had to be printed TODAY. I tried to print and the print is so light you cannot read it. When I tried to adjust the settings
I could not because the settings for this printer have been removed as is everything to do with Epson.

3. I was not able to change any print settings.

4. The printer was being detected. Since I could not read anything I went to the local print store and paid them to print my documents off. GREAT HUH?

5. No third party security installed anywhere other than virus detection.

What I ended up doing was removing the device, cleaning and defragmenting, tried to chkdsk but that isn't allowed anymore. I then reinstalled the device twice. First time it failed, second time it caught it and it is working again. Troubleshooting is
worthless as is much of what is put into this program. And if anyone else wants to talk to me have them call me. You have the number.