Windows 10: I have a common trojan in my device which is trying to connect to xmrig.moneroocean.stream,...

I found a thread with a fixlist apparently, but it got removed from the oneDrive. Can someone please help with this stuff.

:)

 

no streaming

Hi,

Windows 10 has an improved capability to stream on your devices through casting. We suggest that you follow the steps below on how to cast a device using Microsoft Edge:

• Open Microsoft Edge.
• Go to a website that contains the media (ex: video, picture, audio) that you want to cast, click the
  ellipsis button at the top right corner, and select Cast media to device.
• Windows will now try to connect to your network and detect your DLNA device (smart TV).
• Make sure to turn on the Bluetooth on your smart TV. Click on the DLNA device (smart TV) you want to cast to.
• Windows will now connect and cast to your DLNA device (smart TV).

Let us know if you need further assistance.

 

Lagging while streaming games from xb1 to windows 10 pc

Hi there,

Thanks for reaching out to us with this issue. Sorry to hear about your issue with lag while streaming. That can be super frustrating. You may wish to try the following steps to see if it helps clear things up and get them running smoothly. For best results,
try them in order to see which works best for you.

1. If possible, connect both your Xbox One console and your PC over a wired Ethernet connection.
   
2. If a wired connection isn’t possible, try lowering the quality level. For information on how to change your quality, see
   
   How to use game streaming in the Xbox app on Windows 10.
3. To try to improve your game streaming experience, see
   Improve Xbox app for Windows 10 game streaming performance.
4. Finally, try the Test streaming option for additional suggestions for your specific network configuration:
   • Select Connection, select your Xbox One console, and then select
     Test streaming. The Xbox app will test the streaming connection and report its results.
     

I hope that this helps out and please let us know the results!

 

Error 10 (device doesn't start) while trying to load a VCP to a USB serial converter on Windows 10

HI Joost,

Thank you for posting in Microsoft Community and being a part of Windows 10.

I understand your concern about accessing the USB device on your computer. Do not worry we will help you with this issue.

Do let us know the following to assist you better with this issue:

• Is this issue specific to the device (Are you able to connect any other device to your computer)?
• Were you able to see any error code/ error message along with Error 10?
• What is the make and model of your device?

Try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to run Hardware and Devices troubleshooter as it checks
for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner.
  
• Select the Hardware and Device options from the list.
  
• Click Next to run the Hardware and Device
  Troubleshooter.

Step 2: I suggest you to refer to the Microsoft support article, refer to the section Error code: 10, try the troubleshooting steps suggested and check if it helps.

Error codes in Device Manager in Windows

Step 3: I suggest you to download and install the pending updates on your computer.

Steps:

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Get back to us with an updated status of this issue for further assistance.