Windows 10: I have picture but no sound when I connect my pc to my tv

I have a Dell G7 laptop with windows 10, an hdmi cord, and a sanyo tv.


Am I missing anything else?

:)

 

No sound when connecting PC to TV with HDMI

Connecting an IVIEW PC to Vizio TV using HDMI cable, video works, but no sound. I right click on speaker and select playback devices, the only speakers listed are the PC speakers, Intel SST Audio Device (WDM). Tried using IE and Chrome. Connected same
PC and cable to Samsung TV, no problems.

 

Laptopc can´t connect to TV

Hi,

Please reply to the questions mentioned below in order to assist you in a better way.

• Are you connecting the PC and TV using a HDMI cable?
• Did you make any changes prior to the issue?

I suggest you to try the steps below and check if it helps.

• First you need a video cable for making the physically connection. For better picture quality, you should connect the computer to the TV using standard VGA ports or via the DVI to HDMI cable provided your TV supports these ports.
• Open the "display settings" in your computer and activate output to the TV screen. You can either mirror content of your computer on the TV or extend the display just like a dual monitor screen.
• Pick up your TV remote and switch to "External Inputs" from the menu. You will need to change the default "Video 1" to a different selection which may be "HDMI 1" or "Video 2" depending on how you have made the connection.

Important: Make sure you connect the cable to the TV before turning on the computer as sometimes it may fail to recognize external display.

You may also need to change the screen resolution of your TV using the Display settings in your Control Panel else the picture may appear distorted.

Please revert if you face any issues with PC not connecting to TV.

 

Sound issues after connecting my TV to my PC using HDMI cable

Hi,

Thank you for contacting Microsoft Community.

I would suggest you to refer to the mentioned steps and se if it works:

• Connect your Laptop to the TV and turn everything on
• Right click on the speaker icon, on the task bar.
• Choose Playback Devices. (You will need to be connected to your TV first to see it listed here).
• Click the Properties Button with the TV highlighted in the list
• Click the "Advanced" tab
• Here you can set the default format for audio playback.
• 
  
  By default this will be set to the highest quality . You can try each level and use the "Test" button to see if it works.
  
  Hope this helps.