Windows 10: I have problems with the drivers

I have problems on the computer with the Wi-Fi board and battery drivers since the Wi-Fi networks do not appear and I have error code 10 and code 40 in the device manager. In addition, the battery is in good condition and the calibration was carried out at the same time. reaching 70%, the laptop turns off and turns on again with the charger at 0%

:)

 

ATI Driver install problems

It's all laid out here: How To: Reinstall Video Drivers (Quick Guide)

It could be a problem with the monitors OSD chip.

 

New here and seeking for help: problems with graphic card

Thanks very much lilhasselhoffer. I'll start doing what you suggested step by step.

One question thou: you suggested me to Download the latest driver package from Nvidea. However, the link you posted is for the newly released GeForce GTX 760? Am I supposed to download the drivers for that card?

Sorry for my questions. As I said, I'm not an expert at all.

 

Nvidia driver problem with 940 MX on Windows 10 x64

I would only go back to the driver from the computers manufacturers if you experience any issues with the latest drivers from devie manufacturers.

If everything is still working well with the clean boot then you can start troubleshooting as follows to start:

How to determine what is causing the problem after you do a clean boot


1. Log on to the computer by using an account that has administrator rights.
2. From Start, search for msconfig. (In Windows 10, use the Search box from the Start menu. In Windows 8 or 8.1, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.)
3. Select msconfig or System Configuration from the search results.
4. Tap or click the Services tab, and then tap or click to select the Hide all Microsoft services check box.
5. Tap or click to select the upper half of the check boxes in the Service list.
6. Tap or click OK, and then tap or click Restart.
7. After the computer finishes restarting, determine whether the problem still occurs.
• If the problem still occurs, repeat steps 1 through 6, but clear the lower half of the check boxes in the Service list that you originally selected.
• If the problem does not occur, repeat steps 1 through 6, and select only the upper half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem when only one service is selected in the Service list, this means that the selected service causes the problem, and you should go to step 11. If no service causes the problem, go to step 8.
8. Repeat steps 1 and 3 in this section.
9. Tap or click the Startup tab, and then tap or click to select the upper half of the check boxes in the Startup Item list.
10. Click OK, and then click Restart.
• If the problem still occurs, repeat steps 8 and 9, but clear the lower half of the checked boxes in the Startup Item list that you originally selected.
• If the problem does not occur, repeat steps 8 and 9, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem after only one Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the problem, and you should go to step 11. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 1 through 7 without selecting the Hide all Microsoft services check box in each step.
11. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then tap or click to clear the check box for the problem item.
From <How to perform a clean boot in Windows - Microsoft Support>