Windows 10: I regularly get BSOD

While playing elden ring I always get a WHEA BSOD, this only happens on Elden Ring, nowhere else. After entering the MEMORY.DMP file I got this Bugcheck analysis. Can someone help me to know what this means?******************************************************************************* * * * Bugcheck Analysis * * * *************************************************************************

:)

 

PC reboots regularly with no warning - no BSOD


Still the question remains why driver verifier was used, a dump or a few dumps contain in most cases enough for a different step than driver verifier.

If you indeed had multiple BSOD crashes, I would want you to upload a zip from the DM Log Collector so the dumps can be analyzed, a single dump is than inappropriate to suggest something properly.

 

BSOD regularly

Since upgrading to Windows 10 I get BSOD : irqs_notless_or equal to, I can repair it with System Mechanic 14.6, but an looking for a permanent fix, any suggestions?

 

BSOD regularly WHEA_UNCORRECTABLE_ERROR

STOP 0x124 Troubleshooting [/i] Read carefully before proceeding.



Warning

If you're overclocking your system, revert back to stock clocks now.





Note Test the system once the overclock is removed before continuing with the steps outlined below.

Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




TWO [/i] RAM TEST
*Arrow Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it please.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.




THREE [/i] HDD TEST


Note Please run HDTune first, in the order posted!
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

*Arrow Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.


Note Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.

*Arrow Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log *Arrow Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums




FOUR [/i] GPU TEST
*Arrow Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.

In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor

• the frequency of the GPU,
• the GPU memory clock,
• the temperature,
• the power,
• the load on the GPU,
• Etc.

I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.