Windows 10: imposible de me connecter a one drive

imposible de me conecter a one drive

:)

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
How to Unlock Drive in Windows 10: 5 Ways to Remove a Lock

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!

 

The drive is connected with USB but will not Initialize on Windows 10

Hello Moksha,

As you are facing issues with accessing the USB drive on your device, we will help you with this issue.

Provide us additional information to assist you better with this issue:

• What is the complete error message/ error code of this issue?
• Have you made any changes to the operating system prior to this issue?
• Does this issue confined to the specific drive?

Try few of the below workarounds to identify the cause for the issue:

• Connect the USB drive to different ports and check if it is working fine. This will let us know if the issue is with the port.
• Connect the USB drive to different computer with different ports to check if the issue persists with the drive or the computer.

Let us try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to run Hardware and Devices troubleshooter.Hardware and Devices troubleshooter
checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device options from the list.
  
• Click Next to run the Hardware and Device Troubleshooter.

Step 2: I recommend you to install all the pending updates from Windows Updates on your device and check if you are able to access the USB drive.

Steps:

• Connect to the internet.
• Press Windows key and type updates.
• Click on Check for updates.
• Under Windows Updates, click on Check for updates.
• Try to install the updates being shown.

Hope it helps. Try the above and update us the status of this issue with the required information, we will be happy to help you further.

Thank you.