Windows 10: Installation of 1909 version

Discus and support Installation of 1909 version in Windows 10 Installation and Upgrade to solve the problem; I've tried 5 times, meeting all the OS requirements for installation and having the same problem. "can not open Windows Explorer personalized... Discussion in 'Windows 10 Installation and Upgrade' started by Cecilia Garza-Trevino, Apr 11, 2020.

  1. Installation of 1909 version


    I've tried 5 times, meeting all the OS requirements for installation and having the same problem.

    "can not open Windows Explorer personalized settings."


    Also, tried some of the possible solution, yet I would like to have some solid technical advise.

    :)
     
    Cecilia Garza-Trevino, Apr 11, 2020
    #1

  2. Windows 10 1909 Causes Secondary Hard Drive to not be Recognized

    Installing the Windows 10 1909 Update causes my secondary hard drive to not be recognized.

    Steps to confirm issue:

    • Secondary drive not visible in Windows Explorer
    • Secondary drive not visible in device manager
    • Secondary drive not visible in disk manager

    Steps to replicate issue:

    • Installing 1909 update

    Steps to resolve issue:

    • Uninstall 1909 update

    Since updates can only be delayed for so long, an actual fix would be appreciated.
     
    Teknophile, Apr 11, 2020
    #2
  3. deving Win User
    User.000 issue after updating to 1909

    I'm one of the many people suffering from issues with user profiles after applying Update 1909 to Windows 10. I've read all the threads I can find on the topic here and have followed the suggestions, all to no avail. Any other thoughts are appreciated.

    After applying Update 1909, the ProfileImagePath was changed to c:\users\User.000
    One file that was always in use and couldn't be removed was left in c:\users\User (can't recall or find the exact file now), so I could never rename or remove the c:\user\User directory.

    I followed the multiple suggestions from Brink and others:
    • Rebooted at least 6 times
    • Enabled hidden Administrator
    • Booted into Safe Mode
    • Changed ProfileImagePath
    • Tried to rename c:\users\User but couldn't because a file was still in use
    • Copied all data from c:\users\User.000 into c:\users\User
    • Rebooted and had temporary profile
    • Followed steps in Brink tutorial to change ImageProfilePath; rebooted with no change
    • Restored using Restore Point from before Update 1909 - returned to single profile state (User.000)
    • Removed each update that was installed individually and rebooted after each update removal - profile state never changed
    • After all updates were removed, repeated the steps above with hidden Administrator, changing profile, etc. - same issue with file in use in c:\users\User
    • Followed all steps above with hidden Administrator but without copying files from User.000 to User - same results

    Any suggestions are greatly appreciated!
     
    deving, Apr 11, 2020
    #3
  4. Ramhound Win User

    Installation of 1909 version

    Completely missing Dot Net in Windows 10 -1909?

    .NET Framework is built-into Windows 10 version 1903 and Windows 10 version 1909. It is not possible for at least this version of the .NET Framework to be installed.

    The error you have received, is likely due to the fact the application you are attempting to use, is specifically trying to target a version of the .NET Framework you don't have installed. I suggest using official Microsoft tool to download a Windows 10 version 1909 ISO. You can use the Media Creation Tool and/or the Upgrade Assistant. Windows ISO Downloader was only recently updated to support .NET Framework 4.8 on November 8th 2019. If you were not using Version 8.22, and would like to still use the tool, you need to download that version.

    RaymondCC .NET Detector looks at registry keys that are created when you install .NET Framework. It does not support the .NET Framework version that are included with Windows 8.0+

    The built-in version of the .NET Framework for Windows 10 version 1903 was .NET Framework 4.8

    .NET Framework 4.5+ has never been located in the list of Windows Features for any version of Windows. The lack of .NET Framework 3.5 is likely due to your WinSxS directory not containing it.

    You can install .NET Framework 3.5 if you run the same command you ran, but provide a source, to the components you need.

    This is due to the fact the .Net Framework 4.8 is already installed on Windows 10 version 1903 and Windows 10 version 1909. .NET Framework 4.8 is an in-place upgrade to .NET Framework 4.5

    This normally only happens when you have moved vital folders like the user's profile to a non-standard location.

    Your inability to install .NET Framework 3.5 is extremely easy to fix and likely the reason your unable to run the third-party application. Perform the following steps to solve that problem.

    1. Download a Windows 10 version 1909 ISO
    2. Mount the ISO within Windows 10
    3. Run the following command, the command assumes, the drive letter assigned to the virtual mount is D:
      • DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:d:\sources\sxs

    Source: Deploy .NET Framework 3.5 by using Deployment Image Servicing and Management (DISM)
     
    Ramhound, Apr 11, 2020
    #4
Thema:

Installation of 1909 version

Loading...
  1. Installation of 1909 version - Similar Threads - Installation 1909 version

  2. Version 1909

    in Windows 10 Installation and Upgrade
    Version 1909: Is version 1909 still supported? If so, why do I get upgrade warnings? https://answers.microsoft.com/en-us/windows/forum/all/version-1909/6239c996-6ffa-4554-8422-9ca0cc126e1e
  3. When installing 1909, will it stay on that version

    in Windows 10 Ask Insider
    When installing 1909, will it stay on that version: Hey! I've been trying to figure out the source of my PC freezing and needing to be shut down with the power button. I suspect the windows 2004 update caused the problem, since the issue appeared around that time. If I install the 1909 version, will it automatically update to...
  4. Windows 10 Version 1909 install errors

    in Windows 10 Installation and Upgrade
    Windows 10 Version 1909 install errors: Hi. I am running Windows Pro, Version 1809, which was installed a year ago. Over the course of the last few months, I have tried at least 20-30 times to install version 1909. Every time I try to install it, it re-downloads the entire installation package. I have deleted the...
  5. windows update version 1909 will not install

    in Windows 10 Installation and Upgrade
    windows update version 1909 will not install: this the 3rd time that I tried to install version 1909 of windows 10 and it is failing all the time https://answers.microsoft.com/en-us/windows/forum/all/windows-update-version-1909-will-not-install/800d647b-834a-4063-a326-5a7b52340397
  6. Version 1909

    in Windows 10 Installation and Upgrade
    Version 1909: I have windows 10. Its asking me to update to version 1909. Is this recommended https://answers.microsoft.com/en-us/windows/forum/all/version-1909/b3f913a2-8f77-4ea8-acaf-767aa97b2677
  7. Version 1909

    in Windows 10 Installation and Upgrade
    Version 1909: I have version 1909 and I was wondering why the monthly update is so large? I just updated yesterday and one update was 2 giga bites and the same thing happened last month. If this continues on I will eventually run out of space on my computer. Thanks, for a response....
  8. Windows 10 version 1909 won't install

    in Windows 10 Installation and Upgrade
    Windows 10 version 1909 won't install: Hello I have been having a problem with trying to install Windows 10 Version 1909 for two months now I gave up during the last attempt in February and just ignored it I have tried to get it to install only to fail every time and get an error: 0x80070005 - 0x2000A - The...
  9. Version 1909

    in Windows 10 Installation and Upgrade
    Version 1909: Hi, I'm Using Dell 3567 with Microsoft version 1803. I tried to update Version 1909, but its not installing completely. After restart it shows the failed message. Please help on this ....
  10. Version 1909 stuck without 1903 installed

    in Windows 10 Installation and Upgrade
    Version 1909 stuck without 1903 installed: I started installing version 1909 which was only notified today, Nov. 24th, without realizing version 1903 failed to install on Sep. 29th when it was received --error code 0x80070643-- so the most recent version I have is 1809 as of May 5th and 1909 is stuck at 100%...

Users found this page by searching for:

  1. KB4556441 for the .NET framework and KB4551853

    ,
  2. win 10 1909 problems