Windows 10: Insyde firmware corrupted my BIOS on Acer Nitro 5, unable to boot the laptop

I wanted to install the additional windows update which updated the firmware of the motherboard I believe, after that the system performed a restart without any succes, not even în bios screen, I am completely unable to access biosI tried several things without any successFirstly removed one ram stickRemoved both ram sticks Removed SSD and ram sticksDisconnected the battery, holded power button for more than 30 seconds and waited 30 minutes before attempting againRemoved battery, disconnected the lithium battery and holded down the power button for more than 30 seconds and waited 30 minutes to

:)

 

Stop code:0xc000021a on Acer Nitro 5 laptop

Hi TN. I'm Greg, an installation specialist, 10 year Windows MVP, and Volunteer Moderator here to help you.

Go into BIOS/UEFI Setup to see if you can set the onboard chip to default. You can power on while pressing the Acer F1 or ESC key. Older models may use F2. This may be listed on the BIOS splash screen.

If you don't get a display for the BIOS even, then I'd reinstall the Nvidia card and properly disable it in BIOS setup before removing it this time.

More about managing Dual Graphics on Acer Nitro 5 laptop:

https://community.acer.com/en/discussion/561750...

https://community.acer.com/en/discussion/543584...

https://www.laptopmag.com/reviews/laptops/acer-...

https://community.acer.com/en/discussion/553471...

I hope this helps. Feel free to ask back any questions and keep me posted. I will keep working with you until it's resolved.

________________________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly
research any product advertised on the sites before you decide to download and install it.

 

Realtek Audio Console on Acer Nitro 5

Hello all. I recently noticed that my Acer Nitro 5 was no longer detecting any headset devices and I am unable to get any input via the mic (and have also borrowed other headsets from the original one I had, all of which have the single 3.5mm jack which
works with the Acer Nitro 5's single audio input). I am also only getting this when I pull up the Realtek Audio Console:



What steps should I take to resolve this issue?

 

Acer Nitro 5 Camera not detected

Hello, where can I download a windows 10 generic camera driver? Because for some strange reason, windows deemed it necessary to delete my acer nitro 5 webcam driver. And before you tell me all your "fixes" don't, I've tried everything except resort back to my previous version of windows, which I don't want to do. SO can someone link a backup acer nitro 5 camera driver? thanks