Windows 10: Intel RST with M.2 for Windows 10?

I just upgraded my SSD to Win10 from 7, and plan to clone an NVMe to use that instead but my motherboard pdf says "Intel® RST only supports PCIe M.2 SSD with UEFI ROM, does not support Legacy ROM. "

So does that mean the m.2 won't work in my current boot mode that's legacy+uefi? right now if I set that to uefi and windows 10 whql support it doesn't see my SSD with Windows 10 on it for some reason and I have to go back to legacy+uefi and Win10 support gets greyed out again.

Guess my question is is there going to be a problem getting the NMVe and SSD to work at the same time so I can clone it?

submitted by /u/Steve44465
[link] [comments]

:)

 

Intel RST service is not running

Hi,

Thank you for writing to Microsoft Community Forums.

The Intel RST service is for the Intel Rapid Storage Driver. The Intel Rapid Storage Driver provides speed for data transfer and improves the performance for SATA drives or PCIe drives.

• What is the make and model of the computer and motherboard?
  

You can follow the methods mentioned below and check if that helps:

Method 1: Changing the startup type for Service

You can try changing the startup type for the Intel RST service and check if that makes a difference. Please refer the steps mentioned below:

1. Press and hold Windows key + R, to open
   Run dialog box.
   
2. Type serivces.msc and click on
   OK.
   
3. Now, scroll down, look for Intel RST service, right click on it and click on
   Properties.
   
4. Now, under startup type select Automatic from the drop down menu.
   
5. Click on Apply and OK.
   

Method 2: Updating the drivers manually

You can try downloading the latest version of Intel Rapid Storage Driver from the

Intel Website and check if that helps. However, I would suggest checking with the motherboard manufacturer website as well.

If you are using RAID configuration, I suggest you to post your query in

TechNet forums, where we have support professionals who are well equipped with the knowledge on RAID configuration.

Nikhar Khare

Microsoft Community - Moderator

 

M.2 SSD not being able to boot from it, windows doesn't recognise.

Ok, this is what happened after all the comments and suggestions, @dude: Thanx for the video, my mb had non e of those settings, it had the raid/option memory gene or achi. Can only choose one or the other. @Saltgrass, my settings did point out auto and enabled the pcie x4, gen 3. I did an bios flash as suggested, because my bios was not the latest version, after a reformat the m.2 was picked up, still cant install OS onto it as it states legacy not found, removed my dvd rom from the sata port to another, and the drive was found and installed. Only issue now is that it's still not my OS drive but it at least now works and is installed, but on the Intel rst drive the obtain memory gene option to enable is greyed out, and shows as disabled. However the program lists the M.2 and it is working 100%,. I installed overwhatch onto it, it performs perfectly. But will update the intel driver tonight and see if that makes any difference. Seems the bios flash enabled the settings listed by @dude that was not present pre-flash.

So the m.2 drive works. I can game off it and install omnto it. Can not install windows on it, gene memmory is enabled, pcie x4 is on and on auto detect, Motherbaord lists all the drives connected, motherboard ahs been updated to latest bios. After flash new settings became available, m.2 is now on memmory gene enabled not achi, windows os is enabled and fast boost is enabled, intel rst is installed and lists all the ssds and the m.2, however the m.2 on memmory gene is dissabled and the option to enable is greyed out. Will update the driver as Essenbe suggested of the m.2 and see if anything changes. Thank you all for the help, I can now atleast use my m.2

 

intel RST driver

couldn't update Windows 10 intel rst doesn't work