Windows 10: Intel usb 3.1 extensible host controller - 1.10 Microsoft driver repeatedly rescanning for...

I recently started to get the above driver repeatedly scanning for hardware changes every 5 minutes. This only happens when I have a USB-C multiport device connected to the USB-C port.It doesn't happen all the time. Sometimes it will constantly do the scan every 5 minutes, sometimes it will scan, but stop after a few times.I finally tracked it down to the above driver. I disabled all the USB drivers and then reactivated them 1 at a time till I was sure the above was the issue.My system is a Dell XPS 15 9560, the USB-C multiport devices are the Dell DA200 and DA300. The driver is version 10.0

:)

 

Intel® USB 3.0 eXtensible Host Controller Driver

My Lenovo G510 has 2 USB-3 ports. Updated windows 10 have changed USB Controller driver to 1.0 (Microsoft) resulting my USB 3 speed is not more than USB2.

My device is Intel (R) USB 3.0 eXtensible Host Controller (C220/C610) and windows does not allow to change driver even for testing purpose from Intel support site (Windows has determined that the best device driver already has been installed.) Any idea to
make my USB3 working as USB3. Tanks in advance.

 

Intel USB 3.0 eXtensible Host Controller waking computer from sleep

Hi Parker,

Thank you for posting in Microsoft Community.

I understand your concern and frustration you have been through. I will be glad to assist you.

Follow the Methods below.

Method 1: Run power troubleshooter.

a. Press Windows +R key on the keyboard.

b. Type troubleshooting in the pop-up box and press Enter.

c. Click System and Security on left panel.

d. Click Power, new window will popup.

e. Follow the on screen instructions.

Method 2: update Intel® USB 3.0 eXtensible Host Controller Driver from this link.

Downloads for Intel® USB 3.0 eXtensible Host Controller Driver



Method 3: Compatibility mode

Follow the steps below on how to install driver in compatibility mode:

1. Download the driver from the manufacturer’s website and save it on your local disk.

2. Right click on the setup file of the driver and select “Properties”.

3. Select “Compatibility” Tab.

4. Place a check mark next to “Run this program in Compatibility mode” and select operating system from the drop down list.

5. Let the driver install and then check the functionality.

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.

Thanks

 

Intel (R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft), Intel (R) Wireless Bluetooth(R)

Hi Graeme.P,

I've already done that and it does not work.

The problem is, Microsoft's driver has overriden Intel's USB 3.0 eXtensible Host Controller driver and this is the one causing the issue.

Uninstalling either the Intel Bluetooth Driver or Intel (R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft), will only make WIndows 10 reinstall back the latest drivers.

And if I remove or disable the Intel (R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft), I would lose not only bluetooth, but all USB and LAN or Wireless Lan connection too.

Regards,

Shafie