Windows 10: Intermittent BSOD's on newly built PC

I'm getting Some BSOD's intermittently about two weeks after building my computer and I need some help in pinpointing the issue.


Uncertain as to the cause, however it blusescreened multiple times during my initial Windows setup, now it seems to happen a couple of times a week sort of randomly, often as I come back to the PC it will be stuck in BSOD state I disabled auto-restart so I could capture these. One time I had a BSOD after opening HWM hardware monitoring software.


Temperatures seem ok, maxing at about 70 degrees on both GPU and CPU and the BSOD doesn't seem to happen whilst they are at their upper limits.


I've done several components tests on BurnInTest with no failures during the test.


On the dropbox link is my MSinfo export and three latest minidumps.


https://www.dropbox.com/sh/dt0fkkoa9aon4ws/AADWbKflSfxfrcKfXJMhJZf1a?dl=0


I would be appreciative if anyone has some idea as to what may be causing this.


Thanks,

Sam

:)

 

BSoDS on newly built PC

Since it is my first time, i did not know that there is a vendors approved list. and it is not. is that the reason for my BSODS?

 

Multiple BSOD continues on a newly built PC.

Hi Team,

I continue to get multiple BSOD on a newly built PC. I've installed updated windows and drivers (to my knowledge). I've ran a memory check and shows no issues. I've ran a SFC check with no issues as a result. I would get a BSOD from browsing, typing up a
doc, or even from not doing anything after a restart.

All the memory and graphics setting are still on their default settings.

I've went ahead and linked the latest memory.dmp, minidump, and msinfo.

I appreciate the help from this community!

memory dmp

 

BSoDS on newly built PC

Hi!, 3 days ago I built my very first PC, using this build (System Builder) it was all running great but then yesterday I started encountering multiple BSODs that says Memory_Mangement(this is the most common one), IRQL_Not_less_or_EQUAL(only appeared once) and Page fault in non paged area(only appeared once.) What I did was I reformatted my HDD and while installing the OS, during the "windows is expanding" part to be exact I keep on encountering a problem stating that the files are corrupt or missing. Then I did some research and I found out that Removing one of the RAM sticks would do the trick and it actually did. Right after the installation of OS, I put the second stick back on and it started having BSODs to the point that I can only use my pc for like 5 mins at the most before the BSOD occur. So I removed one of the sticks again and to my surprise it aint having BSOD and as of now its been running for about an hour or so without any problem. I am sorry if this is a stupid question but which one do you guys think is the problem, my mobo's RAM slot or the actual RAM card? pls help me. any help is greatly appreciated and thank you in advance!