Windows 10: Keep getting BSOD when attempting to update

I am on Windows 11 Pro Insider Preview build 2253.1000. It's trying to update to 10.0.22621.598 and gets to 100%, restarts then has another update and gets to about 20% and blue green screens with MEMORY_MANAGEMENT, restarts again then blue green screens a little after posting. I do not want to reinstall or reset windows, so don't even suggest it.

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Intel E5200 Gets Updated, R0 Stepping Coming Up

Intel's Pentium Dual-Core E5200 processor is getting on course for a specifications update. The chip will feature in a new, improved Wolfdale-2M core, spec'd out as the R0 stepping, from its current M0 stepping. The new stepping is intended to add new instructions, power-management features, and bring about changes in the chip-package. A short list of known changes is as follows:

• CPUID changed from 10677 to 1067A
• Power State Indicator (PSI) support with Intel 4 series chipsets
• New instructions - XSAVE and XRSTOR
• New S-spec and MM numbers
• New halide-free chip package

Due to the changed CPUID, users may require BIOS updates to detect the CPU. According to the company, E5200 R0 should be out by April 13.

Source: TechConnect Magazine

 

Webcam Triggering 'Attempted Execute Of No Execute Memory' BSOD - Windows 10

Hi,

Thank you for contacting Microsoft Community.

ATTEMPTED EXECUTE OF NOEXECUTE MEMORY Blue Screen of Death error appears when a device driver attempts to execute a program from a non-executable area of the memory. An error in the RAM (Random Access Memory) can also cause this BSOD error.

If you are using a built-in webcam, then, update the webcam driver and check if that helps.

• Press 'Windows key + X' and choose 'Device Manager'.
• Under 'Imaging devices', right-click on the webcam driver and update the driver.

Also I suggest you to follow the steps from the below article and check if it helps.

Troubleshoot blue screen errors

Troubleshoot blue screen errors

Hope this information is helpful and do let us know if you need further assistance. We will be glad to assist.