Windows 10: Keep getting BSODs

I built a pc a while ago and I've been getting BSODs on it on a weekly basis.


I already tried:

updating drivers

uninstalling and reinstalling graphics drivers
ran memtest86 (10 passes) with no issues
ran Sfc /scannow with no issues
ran chkdsk with no issues
scanned for malware

reset Windows 10

ran Driver Verifier for 48 hours with no issues



More recently, I turned off fast startup, which stopped the BSODs for a few weeks, but they started again.

The last time I asked on here, I was told it was likely a hardware error. I looked through and found that the RAM I was using wasn't officially supported by my motherboard, so I borrowed some RAM that is officially supported from a friend. We know that this RAM works. Almost immediately after I installed the new RAM, I experienced 4 BSODs.


Here are my crash dumps from today:


https://1drv.ms/u/s!Art5uQb9BwJ0cqGQZp_SdHByi3s
https://1drv.ms/u/s!Art5uQb9BwJ0cqGQZp_SdHByi3s
https://1drv.ms/u/s!Art5uQb9BwJ0c7K-jI5GouLZY1o
https://1drv.ms/u/s!Art5uQb9BwJ0daC51YYympKYyE8

Here are the links to the old threads, there's more detailed info about what I did in those threads:


https://answers.microsoft.com/en-us...ly-bsods/6fc20328-ae61-47c6-bacc-44b23e44e28e
https://answers.microsoft.com/en-us...skrnlexe/0bfccaa7-0bba-4999-89b5-eea421d37611

Here are my pc specs:


Windows 10 Home Version 1809
MSI B450M PRO-VDH motherboard
AMD Ryzen 5 2600 (stock)
MSI Radeon RX 580 Armor 8G (stock)
16 GB (2x8GB) Patriot Viper DDR4 3200 (stock)
Inland 240GB SSD boot drive
WD Green 500 GB HDD
WD Elements 2 TB External HDD

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it