Windows 10: Kernell Power Even ID 41 Category 63

here

 

Please update/reinstall your ASUS Xonar audio drivers.
Driver Reference Table - cmudaxp.sys
Code: *** WARNING: Unable to verify timestamp for cmudaxp.sys *** ERROR: Module load completed but symbols could not be loaded for cmudaxp.sys 10: kd> lmvm cmudaxpstart end module name fffff801`08400000 fffff801`0872e000 cmudaxp (deferred) Image path: \SystemRoot\system32\drivers\cmudaxp.sys Image name: cmudaxp.sys Timestamp: Tue Jun 02 11:11:20 2015 (556D7338) CheckSum: 002A7517 ImageSize: 0032E000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote]

 

[/quote] Okay I reinstalled the same newest driver available on ASUS web site and put my base clock back to 200(4Ghz). Will report back soon...

 

Reinstalling drivers did not help...

 

Please uninstall Kaspersky while troubleshooting and use Windows Defender as alternative.
Service articles







Diagnostic Test

CPU TEST


Run Prime95 - Stress Test Your CPU - Windows 10 Forums CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums



Note If you're overclocking anything, please stop it and set everything back to default while troubleshooting


Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

 

It might be a dumb question. My Intel SATA controller is 3gb/s and HWiNFO shows for one drive Serial ATA 3Gb/s @ 3Gb/s and Serial ATA 6Gb/s @ 3Gb/s for the other while both of them are capable of 6gb/s. Why does my Intel shows as 3gb/s @ 3gb/s instead of 6 @ 3
Attachment 62485

Uninstalled Kaspersky, currently running prime95 Small FFTs on default CPU clock. max temp after 20min is 49C

 

There are no such things as dumb questions, only dumb answers which I try to avoid *Smile

Your motherboard has 8 sata 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) and 2 sata 6Gb/s connectors (GSATA3_6, GSATA3_7).
The 6Gb/s connectors are under the marvell 9128 chip

The question is which connector is used for the Intel drive?

 

All of my drives are connected to Intel (Sata 2_0 - Sata 2_5 the BLUE ones). Intel SSD is connected to Sata2_0 or Sata2_1 idk which one goes first or closer to the mobo. I've been reading that it is best to connect your Drive that has Windows on it to a native SATA port which is Intel 2.0 3gb/s in this case. CPU is still under prime95 test, it's going 7th hour already is it safe to say that this is stable? No errors so far. Max tems is 53C
Attachment 62498

 

Please run IntelBurnTest, you can stop Prime95 *Smile

There is only 1 drive in your specs, please fill in all of your hard drives.

 

What do you mean one, I have 2 SSDs and 2 HDDs all of them are connected to Intel ports *Rolleyes

 

In your 'My System Specs' only 1 drive is present

 

Oh, you are talking about my PC info I put in my profile. Those Drives are visible on screenshot on page 2, the question is why does it show Intel SSD 3gb/s @ 3gb/s instead of 6gb/s(capable of) @ 3gb/s(current speed)

 

Please fill in all your hard drives in your system specs, the 'My System Specs' is easier for lookup.

What does Speccy say about it?

 

IntelBurnTest shows no errors! Is is Kaspersky causes the issue?
I am so confused *Shock it supposed to be SATA III but it shows SATA II.
Attachment 62506

 

I'm no expert, you better ask it in another part of the forum, only thing I could suggest is to use a different port.

What test did you run with IntelBurnTest?