Windows 10: Laptop battery not charging, BIOS says AC adapter not installed

My laptop no longer recognizes the AC adapter and doesn't hold a charge anymore. When I went to the BIOS, it told me that there wasn't an ac adapter installed.


I've already replaced the harness jack and had to buy a new battery because the other one was completely drained. I've already tried the whole "Unintall the thing in Device Manager" but that didn't work.


This happened after I moved my hardware from one shell to another but I can't think of anything that went wrong. Depending on where I look, some say you don't need to install anything to get the adapter to work while others say the only driver has been the same for years. I have no idea what to do.

:)

 

laptop battery wont charge after latest update

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s okay if you only have 1).

7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.

 

Laptop no longer charging since Windows 10 update

If the laptop works without the battery then charger is functioning correctly. Take a cloth with a bit of rubbing alcohol on it (or some on-the-go alcohol swabs), and clean the metal contacts that connect your battery to your laptop.

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Laptop no longer charging since Windows 10 update

Thanks for the response, but the issue is not the battery or the laptop. It was charging and working fine prior to this most recent Windows 10 update.

I'm sorry, I don't understand what you're trying to say. When the charger is plugged in, it just says "plugged in", but my battery has been at 2% for the past several hours. Obviously the charger is doing something since it's holding the 2% power, but it's not charging. There has to be some day to bypass whatever this update broke.