Windows 10: Laptop not booting fully and then shutting down

Today my after coming home from using my laptop in school it wouldn’t boot. I left it on the charger and came back to it constantly turning on and off on and off never really fully booting just showing signs of booting does anyone know why

:)

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Why doesn't my laptop boot up fully?

Hi,

Thank you for posting your query in Microsoft Community. We understand the inconvenience caused and will assist you.

I suggest you to perform a Power Drain by following the steps provided below and check if it helps.

• Remove the battery.
• Long press the power button for 15-20 seconds.
• Start the computer by connecting the power source (battery should not be connected).
• Check if the problem still persists while starting the laptop.
• If not, then connect the battery and can use the laptop.

If the issue still persists, follow the steps provided below:

• On a working PC, go to the
  Microsoft software download website and create Windows 10 installation media.
• Insert the installation media you created, and then restart your PC.
• On the Install Windows screen, select Repair your computer.
  
• On the Choose an option screen, select Troubleshoot>>Advanced Options>>Startup Repair.

Hope this helps. Keep us posted on the status for further assistance.