Windows 10: lpksetup at every boot following update to 1809

Discus and support lpksetup at every boot following update to 1809 in Windows 10 Support to solve the problem; Ever since updating I noticed that my log in process now takes a lot longer, maybe I found the cause. I noticed a lot of log files in the Windows temp... Discussion in 'Windows 10 Support' started by artins90, Oct 6, 2018.

  1. artins90 Win User

    lpksetup at every boot following update to 1809


    Ever since updating I noticed that my log in process now takes a lot longer, maybe I found the cause.
    I noticed a lot of log files in the Windows temp folder called lpksetup-date-randomnumber.log

    lpksetup is language pack setup, it looks like it now runs at every boot and fails:

    06:43:40:418 : INFO: _wsetlocale returns: English_United States.1252
    06:43:40:558 : PERF: CbsClient::Initialize - ENTER
    06:43:40:652 : INFO: created Cbs session 0x4643e8
    06:43:40:808 : DEBUG: Found TI process (C:\Windows\servicing\TrustedInstaller.exe)
    06:43:40:933 : PERF: CbsClient::Initialize - LEAVE
    06:43:40:996 : PERF: CbsClient::Initialize - ENTER
    06:43:40:996 : PERF: CbsClient::Initialize - LEAVE
    06:43:40:996 : PERF: Enumerating installed languages - ENTER
    06:43:41:074 : DEBUG: CreateFromIdentity("Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~10.0.17763.1")
    06:43:41:074 : DEBUG: CreateFromIdentity("Client")
    06:43:41:074 : LanguagePack en-US created.
    06:43:41:074 : type: MUI
    06:43:41:074 : identity: Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~10.0.17763.1
    06:43:41:074 : WARN: Unable to open Language reg key
    06:43:41:074 : PERF: Enumerating installed languages - LEAVE
    06:43:41:074 : PERF: RestorePointEnd - ENTER
    06:43:41:089 : PERF: RestorePointEnd - LEAVE
    06:43:41:089 : DEBUG: Cleaning working path in a new process
    06:43:41:089 : INFO: Session 0x4643e8 finalized, reporting no required reboot
    06:43:41:089 : INFO: destroying CbsSession 0x4643e8
    06:43:41:089 : INFO: attempt to re-finalize session 0x4643e8 not acted on



    Probably it has problems writing to the registry, it doesn't mention where it's trying to write though.

    The en-US language pack is already installed on the system and seems to be working fine so far and I have no idea why it's trying to install it again.
    I tried to remove it and reboot but lpksetup created the same log even though en-US was not listed in the languages installed anymore.

    :)
     
    artins90, Oct 6, 2018
    #1
  2. WillBthr Win User

    Windows 1809 Started the install on Surface Pro 4 but it stopped and the update screen closed by itself.

    It started the download of 1809 and I walked away. Came back twenty minutes later and the update page was no longer open. Tried update again and it said it's updated.

    It didn't complete the update or state the RESTART NOW.

    Update history lists 1809 and states RESTART REQUIRED but since it didn't complete the install restarting does nothing.

    So it thinks it's installed the 1809 update but it hasn't. It won't download 1809 again.

    ABOUT say's it is 1803.

    Suggestions?
     
    WillBthr, Oct 6, 2018
    #2
  3. 3Colors Win User
    Windows Updated(16299.309).KB4088776 Restart is required to complete.


    Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

    Thanks for the suggestions and for the time to respond lpksetup at every boot following update to 1809 :) Best regards.


    And thanks for the tip of that program, I'll have it on my list.
     
    3Colors, Oct 6, 2018
    #3
  4. lpksetup at every boot following update to 1809

    PC wont boot up (No POST, No Video)

    I recently installed a new Asus M5A99X Evo r2.0. The motherboard green LED lights up and the case and cpu fans spin. But there is no video when its hooked up to my monitor.

    Steps that i have tried:
    http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

    Made sure all connections are properly connected.

    Flashing the CMOS

    Tested the PSU

    Followed all steps in the user manual

    If there are any links that you guys can point me to or suggestions that could help it would be highly appreciated. Thank you
     
    Mrblack761, Oct 6, 2018
    #4
Thema:

lpksetup at every boot following update to 1809

Loading...
  1. lpksetup at every boot following update to 1809 - Similar Threads - lpksetup every boot

  2. Unable to boot following October 2018 windows 10 update

    in Windows 10 Installation and Upgrade
    Unable to boot following October 2018 windows 10 update: I have a Lenovo Z575 Ideapad which originally had Windows 7 installed, it was updated to Windows 10 via the official free upgrade. It has been running Window 10 (64 bit) fine, however following a Window update when switched on all i get is a black screen, i am unable to get...
  3. win10 1809 update is it safe to use it following a successful install of could there be...

    in Windows 10 Installation and Upgrade
    win10 1809 update is it safe to use it following a successful install of could there be...: I successfully installed the win10pro 1809 update on my samsung i5 ssd laptop before becoming aware of the problems others had, while I don't have any current known issues following my install I am seeking reassurance that it is safe to continue using this update going...
  4. 1809 update

    in Windows 10 Installation and Upgrade
    1809 update: I downloadedl 1809 update but it won't install it shows restart to finish update so many times I did but there is no use[ATTACH] https://answers.microsoft.com/en-us/windows/forum/all/1809-update/f30faefe-9f99-49bc-a74c-7508eda9da43
  5. updating to 1809

    in Windows 10 Installation and Upgrade
    updating to 1809: Hi I have 2 PCs with the same specification one updated ok the other has had 3 attempts the latest shows error 0xca020007. I have run the troubleshooter and fixed any errors but if I check for updates it now says it is up to date even though it is 1803 build X.320. Any...
  6. Text selection followed by right cursor - changed behaviour in 1809

    in Windows 10 Support
    Text selection followed by right cursor - changed behaviour in 1809: We've got a preview build of 1809 running on a test machine, some macros are failing because of a change of behaviour in text editing. All our existing machines exhibit this behaviour - Text Selection (selection is indicated in red) Now press the right cursor key The...
  7. Audio problems following update

    in Windows 10 Drivers and Hardware
    Audio problems following update: After two recent Windows updates, the audio on my Asus notebook quit functioning. I backed out of the previous update and it solved the problem. According to the troubleshooter, there is no problem with the audio devices. Any suggestions?...
  8. Laptop won't boot following reset

    in Windows 10 BSOD Crashes and Debugging
    Laptop won't boot following reset: I reset the computer after it wouldn't boot. Now, when I start it, I get the blue screen that says there was a problem and Windows will restart. But it doesn't restart, just turns itself off. This was a complete reset, deleting everything....
  9. Blue screen at every boot

    in Windows 10 BSOD Crashes and Debugging
    Blue screen at every boot: Hello! Since quite some time, I have been receiving a BSOD with "driver power state failure" message. I am using a Toshiba Satellite L50-A-16Q upgraded to Windows 10. From the beginning I have 2 GB of RAM installed in addition, from an old PC. However, the Blue Screen...
  10. BSOD at every cold boot

    in Windows 10 BSOD Crashes and Debugging
    BSOD at every cold boot: Hello everyone, having BSOD at every cold boot. This is happening on my desktop (first build I made), hardware is: MB: Asus Maximus VIII Gene CPU: Intel i5-6600k RAM: 2x 8GB Crucial Ballistix GPU: Nvidia GTX 1070 Founders Edition Windows 10 Pro 64bit Hoping this is...

Users found this page by searching for:

  1. lpksetup starts at boot